Search results

Bump

Hello I wonder if anyone knows how the change the DPF pressure sensor on a 2014 Mercedes CLA 220 CDI. The car is initiating a DPF regen but the soot levels are not decreasing during the regen. I have monitored the regen parameters with an iCarSoft V3 and the temperatures are rising to around...

I had this problem on my previous car, a 2002 C220 cdi. It turned out to be the gear lever selector itself. The lever sends electronic signals presumably to the gearbox ECU which then engages the correct gear. I changed the gear selector lever and all was well. Fairly easy to do from inside...

Hi David Unfortunately as you have less than the 30 count, I am unable to PM you also. Try to increase your count by posting more messages. I attach two photos of the adaptor.

Hi David I have one for sale. PM if you're still interested. Thanks Paresh

Hi advent77 I did not solve this issue. There were no air bubbles in the the return pipe to the fuel tank so I presumed that it must have been the high pressure pump located at the front of the engine. I did not replace the high pressure pump as it was working fine - apart from the quarter...

Thanks for the reply. Does anybody have the part numbers for the O rings? Are the O rings all the same size for the different connections?

Did we get this starting problem sorted? I'm experiencing the same problem in my 220Cdi

Parking brake pedal not staying down Did you manage to get this problem sorted? My W203 has now developed the same problem. The parking brake will not stayed latched on. I can depress the pedal and can hear the clicking noise/rachet mechanism as the brake is applied. The parking brakes are...

W203 carbon fibre trim now sold. Many thanks to all those who responsed

I have a complete set of carbon fibre trim pieces for a W203 pre facelift saloon for sale. I have the following pieces: 1. Gear selector surround 2. Ashtray cover 3. Audio/climate control surround 4. Front door window switch surrounds - one for each front door 5. Door card trim pieces...

Does anybody have the part numbers for the same plugs but for a W203? There are two plugs in this case - one for the seat and one for the backrest. I think that these two plugs may clip together and then plug into the socket on the wiring loom. Maybe the plugs are the same on all MB models. I...

Hi everyone I have a complete set of carbon fibre trim pieces for a W203 pre facelift saloon for sale. I have the following pieces: 1. Gear selector surround 2. Ashtray cover 3. Audio/climate control surround 4. Front door window switch surrounds - one for each front door 5. Door...

Have a look at this kit that does not require the bumpers to be drilled or the sensors being painted. Apparently you just mount the sensor strip behind the bumper out of view. I don't have personal experience of their system but it looks quite good. The videos on the site are quite informative...

Many thanks, I've just ordered mine..

Go for the original MB part. Its only a few pounds more than the one from ECP or GSF. You will also need some coolant as you are bound to lose some when you remove the old thermostat. I bought a bottle of coolant (the coolant was blue in colour) and used it to make up the recommended 50:50...

I had this problem on my W203 C220 Cdi. The car used to take ages to warm up and the engine temperature hardly went above 50 degrees. Changed the thermostat (do a search on this forum - there are many useful posts about this and how to change the 'stat) and the car warms up within five...

Hi there I had this problem on my W203 C220 Cdi. The car would not pull away as soon as the accelerator pedal was pressed. I owned a W210 E240 before that and it just used to pull away as soon as you blipped the gas pedal - so I knew that something was not right. I had the ATF...