Search results

I can't seem to figure out the pinouts. Which ones to move?

Hi. it seems like i bought the correct verison so it's just to adjust the wires. the GPS antenna should fit also. But where do i get the wood facia trims? can't seem to find it anywhere...

the comand 2.0 was the one I was thinking about:)

My Comand 16x9 facelift retrofit on my S55 AMG. - MBWorld.org Forums Found this when i did som research and it seems fairly easy with almost none modifications. but it doesent say wheere to get parts and what parts to get spesificaly.

I want to replace it with the command unit from the 2003 models( i got this cheap on ebay)

It not working at all, black screen, they told at the shops it was broken. everything works except the screen, and here in norway a new screen costs 750 pounds used, and i dont like the look of the old one, the new looks soo much better. but im not sure what to buy or where to get it.

Hi. Have anyone tried to oppgrade the command system on a 2001 mod to a 2003 command? my old system just broke down and i would like to replace it with the 2003 system, but im not sure how to do it and what parts i need and where to buy them. can anyone help?

Hi guys, last update, figured out the problem now. a previous owner had probably ahd som problems with it so he cut the wire in half on the middle and fixed it him self in a very bad way... some cheap connections and just some tape around it. so I replaced this with a propper concection and now...

I don't know, i think it's relay to fuse to compressor... but i don't see how it matters anyways since the fuse and relay are ok?

I don't know since im only measuring at the motor. but there is power coming to the relay

I took out the compressor and tested it, it ran ok. so i put i back. i saw the cable to the motor was a little burned in the connection. so i celaned it. then when measured the cable to the motor there was no power supplied. the fuses are ok, the relay is new, and the motor for the pump works...

Hey guys, new update. I replaced the relay, so now i get power to the pump13-14 volts measured, but it still won't run... can it be dirt stuck in the pump so it's an idea to remove it and see if i can get it moving or is it most likely the electric motor that is broken and there is nothing to do...

yes, well, I measured the cables to the pump and there is no power supplied to the pump now... , i have to find the problem with the power first. so im going down to MB now to get a new relay.

I tested it now with new cables, and it still did not run. I measured the kables to the pump and it was no power supplied. So when i had a look at the relay i saw i can't just measure it to see if it works, there was power supplied to the relay som im guesing thats were it stops, so im replacing...

it was still connected but only barely, so im hoping thats the problem:) This forum is the absolut best way to figure things like this out! :D thanks to both of you:)

Ok, first i found one mistake, the pump was NOT running, i just thought so becaus air was comming out from the hose, but it was just left overs, i tried again no and the air stopped commin after a while. when i took a look at the pump it was not runnning. The relay was the new Hella type, and it...

Ok, I will try to test this first. Thank you so much:)

it's allways down on all wheels, it never rises. the red message is allwyas on as long as the ignition is... when i start it nothing happens. I tried to undo one of the hoses to the front suspension, and there was air comming, so im guessing the pump is running. So it must be a leak then?

the alarm went on and off very fast a few times during 2-3 days, untill the last time it got permanent and the car got as low as it can go. The airmatic struts are ok, i checked both of them. I was suspecting the valve block or maybe the hose from the pump it self. There is allso a kind of...

Hi, my 2001 W220 just got an airmatic fault alarm. No fuses are broken and the I'm guessing the relay's are ok since i undid the connection on the left front side and air was comming out. The car is as low as it can go on all wheels. what can be the fault if the pump is running but the car...