Guys, anyone breaking a sprinter or vito?
I need a cylinder head for my van, I managed to strip the thread in one of the injector bolt holes.:wallbash:
Mine is a 2001 sprinter 311 2.2 cdi, please pm me with what you have.
Thanks in advance.:)
HI chaps and hello . ime a newby and new to mercs ,ihave test drove a sprinter van 2003 ,quite clean there are one or two things you may be able to help me with.
1 oil hi light comes on
2service light says 5900 minus
3 there is asmell of diesel fumes in the cab when the heater blower is on ...
Hi all
We're new to this and looking for some advice please.
2007 sprinter 311 cdi lwb, started leaking oil smoke etc. Called green flag, taken to garage who advised the dipstick was loose and oil leaking up through that. Advised to replace dipstick.
Ordered new dipstick from mb...
Hi i recently self serviced my sprinter air,oil and fuel filter all the relevant seals were replaced and initially it ran perfectly
Now however on start up the starter motor turns noticeably quicker and once running if you look at the middle pipe coming out of the fuel filter you can see a...
hi got start error on dash
been told could be ecu , wsp or key
if i was to replace the three, ie taken of a van that is working
will this work - some people say it will need to be reprogrammed, some say it will be ok and work fine,
please could i have some adice on this please
there is also...
:( hi
i have a sprinter 311 - was working fine then start error now displayed on dash
engine turns over but will not start, checked all fuses, all ok
please can any one help
thank
hi
i have a sprinter 311 - was working fine then start error now displayed on dash
engine turns over but will not start, checked all fuses, all ok
please can any one help
thank
Hey Guys,
I don't normally drive this van as it's normally driven by one of the lads who hasn't really complained about this van.
Anyway, I drove it for the first time today in a long time and have noticed a considerable loss of power. It struggles to carry herself up a hill in third gear...
hi, i broke down yesterday, it lost its guts when i accelerating at about 40mph, and the EDC warning light came on.
so i pulled over and then it wouldn't start, and there was deisel on the floor, and is deisel on the fan belt.
any ideas?
also do you know how to prime the deisel on these...
Just spotted this forum on the internet and before I start dismantling my van tomorrow has anyone got any ideas for this problem as I know the sprinter 311 engine is also fitted to mb cars. Small 10 mm pipe running off the back of the engine at the top - looks like some kind of overspill pipe is...