beam

Same stalk as wiper controls (this bit works fine). But the push forward/pull back for normal/high beam is broken. Both settings are full beam. Only way to turn full beam off is to nudge the stalk forward a little. Trouble is go over a bump. Any ideas? Complete new stalk needed? Or just...

I've noticed tonight my normal headlights are shining barely 6 ft in front of my car. They light up nothing of the road in front. In fact the fog lights shine further? ?? No malfunction message. I'm guessing a level sensor has failed somewhere? ?? Thought that would bring up a message tho as...

Hi Guys Just took my car for a test (slk 320 r170) and the main beam is not working :failit is the only thing it failed on and I am hoping some can help. No problem with the fuses or the bulbs, I don't know where to begin to look for the relay, anyone got any ideas:dk:

So I've been searching for a while now before posting. I have a 52 plate CLK 500 W209 and want to swap out the yellow low beam headlight bulbs for white ones, I'm reading that it's maybe possible that my car has one of two possible types of ballast, halogen or xenon, but I don't know if that...

Hello, I have a problem with my ML270. (Year 2004) Sometimes when I turn off the engine and remove the key all the lights on my dashboard starting flashing. Now I noticed this is only appears when I leave the light switch on auto mode. When it is flashing and I turn the switch to off position...

I have a 2011 C200 and have the right dipped beam error message. I replaced the bulb, I tried another, nothing. Had AA out who played about with it and it came on, but the following day, out it went. They suggested a loose connection. Is this commonplace?

Know this has been asked before as I've seen many posts on the topic, but I still not sure what I'm looking for in the light assembly. We're taking the ML to Monaco in 3 weeks and need to adjust the projector lamps for European driving. Checking the manual it refers to the lever to switch the...

Since I bought my car in January, the Adaptive Main Beam Assist doesn't work. It brings up a message in the cluster saying "Adaptive main beam assist currently unavailable. See owner's manual". The screen is spotless and the dipped beams are set to left hand traffic, so it's not that. It went...

My low beam heads lights aren't coming on for some reason, the sidelights and indicators are fine I've replaced bulbs Is there a fuse or relay I can check?

Does anyone please have a recommendation as to where best to source this part please? Also, being very novice in the car diy area, how easy/difficult is such a part to self-fit? Thanks!

Hi,trying to replace broken bulb on my Mercedes but haven't got a clue where to get replacement ,attached some pictures for some advice,THX

Hi all, was thinking of installing a pair of these in place of the standard halogen high beam bulbs, should go well with the HiD low beams... problem is, will they fit? Will I end up having to butcher anything? Any thoughts on heat issues, potential fan failure issues? SINGLE BEAM CREE LED KIT...

Guys am I missing something how do I disconnect the full beam bulb? I can get it out of headlight bulb dont know how to get bulb off loom looks like u need 2 hands to do it but only room for 1 hand

Hi, can anyone tell me what my 2003 SL55 Hi beam Halogen bulb is as I left my manual at home & would like to order LED replacements??

I have a 2002/3 W211 e class Mercedes which is showing a malfunction message indicating "Right Dipped Beam Failure" I have so far trouble shooted the problem by changing the bulbs and the igniter control unit on the back of the bulb (black unit that connects to bulb, Ballast unit?) from left...

I have a 2002/3 W211 e class Mercedes which is showing a malfunction message indicating "Right Dipped Beam Failure" I have so far trouble shooted the problem by changing the bulbs and the igniter control unit on the back of the bulb (black unit that connects to bulb, Ballast unit?) from left...

Her sister just told us her 2011 E class full beam dipped on its own :) Does my C class do this as well on auto lights ? This is cool if it does :)

I've just spent a good 20minutes trying to remove the old H7's from my main beams with no avail. They don't seem to have the normal clips that the dip beams have that you just ping to the side and pull out. Any insight into how they are removed/replaced?

Whilst driving yesterday evening the warning for the RH Low beam lamp came on, as we were only 2 miles from our destination, in a well lit area and I was hungry and looking forward to a G&T followed by supper with friends I left it until today to check it. Assuming it was the bulb (the LH low...

Hi all got this message as the bulb blew. Now I've replaced the bulb and it's working fine but I'm still getting the error message?? Is there a way to reset this?