bolt

This has been covered im sure, BUT I just want to be sure i get the head torqued correctly. So can anyone confirm the head bolt torque settings for my 2004 E55 amg please

Hi i have a set of 19's off an ML for my vito but my wheel bolts are too short what length do people use. i would just take the wheel off and check but im at work at the moment :dk:

Hi all, so .... I have my set of amg IV with a 2'' polished lip replicas 8.5 x 18 with 5x112 and et35 and 66.5 centre bore to be fitted to my 2001 w210, my questions are these ... the bolts I have currently fitted have the domed bolt head seating (NOT the straight taper type) but as they are...

so whilst under my car doing my thrust arms and having a general service and play about to see how low I can go and how much change I have of the arms hitting the chassis and inner arches I looked and realised I only had 1 rear diff mount? as you can see here? now the thread looks clean, so I...

Hi All, I have searched around the forums as much as I can with as many different search criteria as I can think of and have come up with nothing. I am replacing the discs and pads on my 2006 CLS55 AMG, job is no problem for me, SBC I have covered etc etc. Have done so many brake jobs in the...

I'm after some bolt on wheel spacers for my CLK W209, from other builds I've seen, my body kit works best with 50mm to the fronts and 60mm to the rears, H&R do the 60s for the rears, but a maximum of 30mm to the fronts apparently :dk: Anyone else make good ones? Any experiences with others?

Folks Can somebody please tell me what the correct size wheel bolts are for my W203 C55 AMG with stock wheels?

Hi all i am new to this forum but after a lot of google searching this is the place to be for mb help. I have purchased a c220 2002 for my dad. at first drive the car felt great however when the heater was turned on there was a diesel smell coming from the cabin. i opened up the engine cover...

Hi, Can someone pls advise of the correct torque setting for wheel bolts 19" alloy's on a W212 E63 saloon. Thanks

Some theving **** has taken 1 of my wheel bolts, no idea why luckily no damage. I thought of 1) replace it and hope it doesn't happen again 2) fit nut covers over the bolts, but this may cause damage if they try to prise them off without the right tool. 3) fit 4 tuner bolts to each...

Hello guys! Does anyone knows a bolt on turbo for a 2006 220 CDI engines?

Hi all I live in Surrey and need help. Re the subject it has gone and the bolt won't screw down. Does anyone know of someone local to me who won't charge the earth to cut a knew thread etc The reason for the urgency is that Iam getting married in 4 weeks and need the car for the big day hence...

Hi All, I know that there are endless threads for this topic but I just wanted to ask a couple of simple questions. ( i hope:wallbash: ) I have a 1994 320ce and have just purchased a set of 17" AMG monoblock (OE I think) I have put them on the car with the origional 8 hole bolts and...

following on, ive purchased me pads and discs + new bolts sensors etc. painted dsc hubs with hammerite, very pleased with the result. next step is stripping the old ones out and replacing with new. now for the question, any one got any idea the correct torque for the caliper bolts, are front and...

Well lads.this little beut decided to snap on me the other day.just the head of it.any ideas to get it out

Any recommendations on locking wheel nuts? There's plenty on Ebay but I suspect they will be too short - I imagine these will require longer bolts (not taken one out yet to look at, will do tomorrow when it's light). A bit of research indicates a 5x112 bolt pattern, but not sure of the taper...

From reading various posts on the US version of the MB problem this seems to be fairly common over there. However apart from Acids post i haven't heard of this happening much over here. I have recently bought a 59 plate c63 and I am just worried of how likely this is?

Just renewed the seal from the block on the above pipe and putting new copper washers either side of the Oil Feed Banjo Dont want to overtighten or not tighten enough also dont want to dissemble Air Filter Box & Hoses to Tighten Up again. Anyone Know the Torque figure its a 13mm Banjo...

Can anyone solve this one.Sent for 4 bolts to replace the ones removed as i changed my discs.The ones i have had are threaded up to the bolt head.The ones i removed had a shoulders on it ,not threaded to the head. Will anyone have part numbers for them please...

I am looking for new wheels for my car (02 W168) and all the specs checkout except the bolt size. My car is 12mm and the wheels are 14mm. Local tyre dealer states the shank should account for the difference but will not say it is safe to use 14mm wheels. I am sure no one would be willing to say...