bolt

any advice on this would be very much appreciated. Am doing the old indian rope trick and replacing the valve stem seals. And what a bugger it is. If you don't get the nylon rope in the pot exactly right, then the valve does not hold completely still and you can't get the collets to pop out...

Hi everyone. Does anyone know what injector bolt and washer is the same as a vito 02 112cdi. I have spoke to main dealers near me and they don't do commercial parts (5 mins away). I can get vito ones but there 20 miles away from me and they say they don't see part numbers. Any help would be...

Apologise if this has been posted before, which I am sure it will have been. I have bought a new plate for my SL500 and want to be able to cover up the metal cross head bolts which fixed the last one, and will fix this one. I have looked at both the yellow plastic bolts you can buy, but they...

Hello all I decided it was about time i changed the supercharger oil on my S55k. Taking the 5mm allen screw out was not that much of a problem, and neither was getting the old fluid out. But getting the damn screw to go back in is proving to be rather impossible. Because of its location i...

I'm starting a new thread because its relating to the correct procedure for repairing an injector. Can someone tell me what is the best thing to do here. Injector 2 has had some work previously because the bolt came out with helicoil on the end but onbviously failed, what is the correct...

Anyone know the recommended torque setting for the wheel bolts on a W209 CLK? Thanks.

Hello My ML with the std wheels had quite short wheel bolts, the new wheels off an Edition 10 model have much longer bolts. Does anyone happen to know the legth without me taking a bolt out to check. Its for some locking wheel bolts. Thanks

I have an ML270 CDI (2002) and had a 'chuffing' injector. So searched and found the advice on how to fix it, seemed quite simple, so went off and bought 5 bolts and washers so I could do all of them. However on undoing the number 3 bolt (the one that was chuffing) I found that the thread was...

Hey guys, after 2weeks now I was shocked today by my local merc dealer who showed me several issues on my w204 which I didn't note til then (maybe too excited the last days)... One of the issues he noticed was that the wheel nuts have corrosion and should have been replaced within the...

I'm trying to take the front passenger seat out of my w124 and the rear fixing bolt nearest the door seems to be spinning freely and yet still can't be moved. It feels as though a captive nut has become loose and the two are spinning freely. There isn't enough clearance to get a nut splitter or...

Looking for 300 for the lot. Here they are: 4 Genuine Mercedes Rucha 16 inches alloy and 225/ 55/ 16 winter tires as new and bolts. ET42 in Edinburgh | Wheel Rims & Tyres for Sale | Gumtree.com the tires a Marangoti, remould, but really good for the time I used them. The alloy are not pristine...

Just reading the thread on the ATF change Ollie wrote. I have changed my ATF before, however I only changed 4 litres, then another 4 a few thousand miles later. I am looking to make one of the drain tubes Ollie made as is pictured in the thread. I am just a little confused as to how it...

hi i recently bought a 2001 ml 270 and injector number 3 had the so called black death i took it out and changed the copper washer but the thread has gone for the injector bolt has anyone any cures for it. i've read a lot of threads about people putting holes in the head buy over tapping them...

Hi, I have just managed to get a set of alloys for winter tires for my father's facelift W203 sedan. The rims are originally for the 211 series; but fit nicely to the C class as well, although the bolt length is not the same as for the original wheels on the car. Could anyone please give...

Has anyone changed out the supercharger belt tensioner recently that might have the old one lying around? i need the bolt off it as i have sheared the thread off the head on mine. I have a replacement pulley which i want to get on. Pic of sheared bolt head thread thanks in advance

The wheel lock nut key has gone missing, normally keep it in the rear hatch with the jack, etc. but can't seem to locate it anywhere.:doh: Maybe the guys who changed the tyres last did not replace it in the boot. However, I now need to remove the locking bolts which are recessed about an inch...

Hi all, as above will the w202 diff fit in the w124 subframe? I have been offered a 3.91 diff from a manual c180, which I would like to fit in to my s124 e300 diesel. The gearing would be perfect, but I'm unsure what mountings the w202 diff has? Anyone know?

So, I need HELP and some information. In the process of assembling new brakes all round on my C43 and installing some SS braided pipes too. I managed to thrash and shred the bolt :wallbash: on the passenger side (right front brake for a LHD). I must say that the removal of the old pipes was...

I have a set of Brabus Monoblock V (17x8), tried to fit them today but my wheel bolts are too short. Anyone knows what size I need? :D

so i saw this on ebay.... Mercedes SL55 CL55 E55 S55 AMG kompressor unit | eBay What else would i need to put it onto my cl55 (non kompressor) amg? How hard would it be?! Anyone else done it? Would you just plug it in, get a remap and go or am i dreaming?!