bolt

I am trying to remove the exhaust cam sproket in order to release the chain but before I do any damage, I want to know if the trox bolts holding the Exhaust cam sproket are left or right threaded. I have already broken one trox bit in the process, then realised I was using the wrong type.

I am in the prcess of taking my cylinder head off for a head gasket replacement, however I am now stuck because I have managed to strip one of the allen bolts. I have tried heat and mole grips but no joy. I need advice on the best way to remove the bolt without damaging the chain cover. :wallbash:

hi what is the thread size of a W124 steering wheel bolt? i dont mean the 10mm allen head size, its the actual thread diameter i need. trying to get the steering wheel bolt off using the usual methods hasnt worked and the 10mm allen is rounded. i'm going to have to drill it out...

Hi Guys Unable to find any info on this so here's what I did, after some faffing 1) drive front of car onto ramps. 2) syphon out all the fluid you can from the fluid container on the right hand side next to the screen washer. A 2 litre ice cream tub is big enough. 3) Get a drip tray...

dealer said 140NM. Sounds high to me. Used to either 110-120NM. Just thought I would check with those who know.

Yesterday I noticed a nasty rattle at idle. Found that the bolt that holds the idler pulley damper to the tensioning lever had gone, so the shock was swinging loose and pulley was bouncing around. Today I removed the shock & spring and have rotated the lever enough to get a new bolt in place...

Hi all, Does anyone know what this is? I recently replaced this / greased it but realised after the event I forgot to look up the correct torque before starting! Now getting a slight creaking from it when turning the wheels at low speed and wondering if I've over-torqued it... Any help...

One of my locking wheel bolt tops sheared off when I was (possibly over-...) tightening it. Not I cannot get it off. Have tried a Locking Wheel Nut Remover reverse thread socket from Halfords, with impact driver and 12v impact wrench, but I think it's slightly too big (19.5mm approx between...

Guys, I need to know the correct bolts in particular the length for an original set of 15" AMG monoblocks (A2024010902) to go on a w202 pre-facelift C-Class? There are quite a few bolts listed on ebay but I need help/advice on the correct ones please (prefer a link to an ebay listing similar...

Apart from being very very angry I now have a (to me) major problem. I looked out of the window this morning to see that one of the rim bolts from my wheels has gone. I have spoken to Mercedes and they can't help as they are only able to supply a complete wheel. I have had a look on ebay and...

Heres a nice simple mod :D Before: After:

GENUINE MERCEDES BENZ AMG 18" ALLOY WHEELS WITH TYRES on eBay (end time 27-Jun-10 19:10:15 BST) Cheers

Hi I need just one wheel bolt to fit alloys to my w202. I got 19 of them with my wheels and I just need another one. Please help. No breakers seem to want to sell me just one.

Which AMG calipers from newer AMG's fits bolt on C43 rotors? I know a guy whom fitted C32 calipers on original C43's fron rotors! Does 211 E55 AMG calipers fit on C43?

Excuse my ignorance but today while checking which coolant temperature sensor I need I noticed that a bolt was missing from the top of the engine. The one just below the oil filler cap and to the right in the picture is missing, the one on the left is there but completely loose. I'm assuming its...

Hi guys - playing about yesterday with my SL55 R230, I found a very purposeful looking bolt under the polystyrene thing that holds the jack & wheelbrace. It bears no signs of much use, has come blue "loctite" type stuff on the thread & at a (extreme) guess looks like a pin that would secure...

Hello, Anyone can see from those pictures which bolts I should have on my wheels and what are they called? Radius or something? Thank you. First picture is the spare wheel bolt on the left beside the one on my wheels now, but it seems from the other picture that I might need to get the bolts...

doing the head gasket on my 2.6 190e and i have come across a problem with the chain guide bolt. it looks as though it has been sheared off inside itself. any advice as to how i can remove it..... this is the first headgasket i have done on a 2.6 merc. i have been following the guide for...

Hi The big long bolt on the oil filter of my wifes 1993 300TD needs 2 little o rings at the bottom of the bolt, the genuine filter does not have these o rings and the EPC lists o rings that are the same size when clearly they are different sizes. Parts dept were of no help. What does...

does anybody know the torque setting for the injector clamp bolt on a 320CDi straight 6 engine. seal blew on one injector as we were leaving for holiday with the caravan, so need to get it sort ASAP.