boost

The diagnosis MB from this error: 0105-001 Check the pressure transducer B5 / 1. The boost pressure is too high. Check (instruction from stardiagnosis machine): The atmospheric pressure and the suction pressure (with ignition ON and engine off) should not differ by more than 30 mbar...

Does anybody know how to boost the signal on the in car tv system on a S500?

Can somebody tell me the location of the boost pressure sensor for a W203 2003 C220 CDI. can you also confirm that the MAP and boost pressure sensor are basically the same thing.

Hi all. my clutch has just started slipping on my 02 112cdi 638, does anyone know if you can lower the boost pressure. Thanks for any advice in advance.

Hi there. Newbie here! I have a 53 plate c180kompressor. Its been flat for the entire time I've owned it. Recently the engine light came on and it was fault code P0234 and P2033: recirculating air flap actuator. As soon as the fault clears it comes back again. I had the engine ecu tested and...

Found this interesting read on supercharging Supercharger & Blower Basics - Tech Article - Chevy High Performance Magazine I then looked into why the CLK 55 Dtm came with 580 bhp standard, and has quite a few changes Info on Clk55 amg...

Hi, Billy posted on the Eurocharged thread a different approach to preparing his car for a remap by Jerry, this included a few checks to ensure his car was suffering from minimal if no boost leaks, plus a few other jobs to complete preparation. Quite a few questions have been asked with regard...

Hello, anyoune ordered and using this performance kit? Is it ok? I am interested in this solution. What about fuel consuption. Is really fealable the power rise? What about noise? I am now using kleeman headers and cat but sometimes i have engine icon on instrument cluster. I need a really...

I recently carried out the EGR disable on my 2005 W163 ML270 CDI (44K miles). I noticed that the boost hose from the EGR valve was not fully home in the EGR. I released the horseshoe spring clip and pushed the pipe home, but a few days later it was half out again. I took the hose out of the EGR...

hi having a on going issiuse with my merc .its bin to 6 garage .with the engine going into limp mode (fault shows as a intermitant low boost fault ) garages have so far changed maf.egr valve and cleaned inside.accelerator unit.engine and gearbox serviced .and injectors cleaned as i had a...

http://europe.autonews.com/apps/pbcs.dll/article?AID=/20121018/ANE/310189898/daimler-said-to-target-1-billion-euros-in-cuts-to-boost-profit&cciid=email-ane-daily And you thought it was hard to claim against a warranty now?

Hi, Is it possible to increase the boost value/ pressure on a W210 E class? E300TD. At the moment the wastegate open at about 16 PSI once the ECU see this kind of pressure, but I can lock it and go up to 26 PSI :D( zoom zoom) , but then ECU shut the boost after that( it must be freaking out...

The price of the boost kits and headers for the 200k has fallen considerably on the Kleemann website. Also considering the current Euro exchange rate they look very attractive. The pulley kit and headers for 2100 Euro, about £1700 + cost to fit them. I guess most people will say, don't...

Hi hopefully someone can help. Have a clk 220 cdi. Noticed yesterday car was loud on boost, whoosh noise from left of car. Today car went to into limp, had odb connected and these were the codes. 0299,, 2395 I've done some research and this appears to be commonly a server split...

Hi, i got an issue with my e class and it seems to be due to a sensor according to diagnostic and some research. Now am a bit confused as to which sensor hope you can help. Can you please clarify if the MAP sensor is the same as boost PRESSURE sensor and differencial pressure sensor b28/8? i...

Hi, just out of couriosity: Is it possible to run a M104 completly stock at low boost? I just want to get some more torque between 1000 and 3500 rpm's I thought about a twin turbo with about 4-6 PSI. Would a bone stock M104 surive that? :D Greetings, David

Just wondered if anyone could help with my problem, since i brought my 1997 e300td last year ive had the maf unplugged because once it got warm and i tryed kick down, it didnt kick down, just stayed at the same speed and revved high. Unplugging the maf stopped this but the other day i...

Hi, i fitted myself one of those boost gauges yesterday :) just a cheap one for now but it will hopefully do the job, anyway, i tee'd it in to an airline that looks asthough it goes from the egr to some kind of sensor with 3 wires? does anyone know if this will give me a correct reading? if not...

On my 2006 C280 when I switch the windscreen blower / demist button on, the aircon and auto lights go out. This means that soon every window is steamed up. In every other MB the aircon has stayed on and it has routed all the blower up the windscreen. My local MB dealer seemed not to...

Hi guys Last night my 220 cdi starting making a funny sucking noise when under load. Then it was all silent and i lost most of my power. My mate took off the egr and cleaned it but it wasnt closing its self when he manually opened it, is this normal? My engine management light also came on...