bulkhead

  1. A

    Injector seal leaking nearest to the bulkhead

    Hello I have a 55 plate 270 clk cdi & the injector nearest to the bulkhead is leaking which I presume will be the copper washer that needs replacing. I am wondering if there are any problems I may come across when changing the copper washer? It has not been leaking for very long so there is not...
  2. B

    R107 bulkhead / firewall rust. Has anyine repaired it? Need help pls

    Hello I am trying to repair my '73 450SL but it is getting the better if me. If anyone has repaired the firewall rust, please let me know how you did it. I have repairable rust in the plenum chamber and I don't need the bulkhead kit. I do have rust in the 2 layers of metal in front of it...
  3. B

    R107 Firerewall / Bulkhead / Plenum chamber rust repair

    Hello all I am new here and have q some questions. BTW: I am in Australia. I am going to embark on a major rust repair exercise on my mercedes 1973 450 SL. I will be using the bulkhead panel kit from the SL shop in the UK. Can somone who has done this. please let me know if: 1) The...
  4. R

    can you fit a steel bulkhead from panel van to a dualiner behind front seats?

    Hi guys Im looking to buy my first vito and after much research im looking for a 115 cdi. Now I am finding on my searches that the dualiner vans are cheaper, better interiors and look the same but I have one question. I am looking to find out if I can fit the steel bulkhead from a...
  5. manofgresley

    Bulkhead thgrough holes

    Hi All. I have a CLK 320 (2001) I need to run extra cables from the cabin through the bulkhead and into the engine bay, to save me time and stress has anyone ever done this, if yes can they advise me the best /easiest place to do it.
  6. Sean380SL

    Mercedes R107 Bulkhead

    Hi all, I wonder if you can help, part of the bulkhead on my 1985 R107 has rusted to the point where the window wiper linkage has detached from the body, randomly and thankfully the rust is only in this area. So question is, does anyone know of a good Mercedes 107 breakers yard? I'm looking...
  7. A

    R107 bulkhead repair

    hi. I'm new to the site and have just purchased an 83 SL500. It turns out it has the common problem for these cars and the bulkhead is shot. I have stripped out and cleaned but now am having a real bear of a time sourcing the replacement panels. I understand Mercedes don't make the...
  8. J

    1979 Mercedes sl bulkhead question with picture.

    Hi all, Ive just bought a 1979 450 sl thats been standing in a garage for 20 years, Ive always wanted one and i found this through a friend of mine, it was his aunties and shes the 3rd owner. The last year it was outside which is a shame and probably has caused most of the corrosion to the...
  9. D

    what material is used on the front interior bulkhead of a Mercedes 230ce

    Hi there, Would anyone know what material is used on the front interior bulkhead of a Mercedes 230ce, 1893? It is located under the front carpet, just behind the pedals and appears to be a cement-like substance. Also, if cracked, can it be repaired? Many thanks, David.
  10. Y

    Vito bulkhead

    Anyone fitted a bulkhead to a vito. I'm planning on doing mine later this week and it looks like I'll have to cut the puller trims to get it in.
  11. poormansporsche

    Boring out speakers holes on rear bulkhead ? Bad idea ?

    on a W202. I was thinking of chopping the centre bit of metal out between the 2 rear speaker holes in the rear bulkhead to allow fitting of some 6 x 9's or the like. is this likely to bugger up the structual integrity or anything - would a metal support need to be bolted on or anything ...
  12. A

    rust repairs? now bulkhead question?

    Hi, I recently bought a 1973 r107 for 3k (which I love) but during the health check at a good local mercedes specialist it was found to be have been repaired underneath with fibreglass and they took out the seats to see the whole floor found several holes which had been hidden. I have been...
  13. R

    Vito 638 bulkhead

    Hi Forum Members, Can you help? I want to fit a full bulk head to my Vito 638 MK1, the only ones that I seem to see for sale (And lots of them) are for a 2003 onwards. I assume this is the Mk2 (639). My question is, will it fit in the MK1? as I am really struggling to find one Thanks, Roy.:confused:
  14. M

    2001 vito bulkhead removal

    Hi I have just purchased a 2001 vito and am planning on removing the bulkhead to turn it into a crew cab, and was just wondering if anyone had any helpfull hints or tips that may make it go smoothly,
  15. P

    Vito halfway bulkhead up for grabs

    Morning chaps. I am going to be removing the halfway bulkhead from my dualiner as I will be fitting a bed. It's a steel bulkhead and full height. I have no idea if its a genuine merc part or aftermarket part but it fits really well and dosnt squeak or rattle. I am open to offers if anyone is...
  16. Colgate

    R107 Rusty Bulkhead

    Evening All, I am looking for someone to carry out some welding on my R107 1985 280SL. The bulkhead has rotted away at either side. I can add photos if necessary. Need some quotes please. Car runs but i have removed the dash and its sorn, i am in chelmsford essex. Col
  17. P

    2001 110cdi dualiner bulkhead question

    Hello All. First post .....long time reader. I am about to purchase a 2001 110cdi dualiner with 108k on the clock. Main reason is we cannont afford a Vclass or a tidy mpv with similer milage but really need a 6 seater with loads of room for camping gear/bikes/ baby junk etc etc. the van is a...
  18. M

    Where to get a bulkhead for 639 vito?

    Hi all! Im looking for a bulkhead for my Vito, ideally a genuine Merc one as they are shaped to allow the seat to go right back and recline a bit too. Dont mind a second hand one if its in good condition. Based in Melksham Wiltshire. Cheers.
  19. poormansporsche

    Chopping Bulkhead on W202 - bad idea ???

    alright peeps, thinking about dumping my first aid kit and fitting a sub in the space somehow but would need to chop a bit out of the bulkhead - is this likely to bugger up my car somehow ???? any thoughts thanks brett
  20. R

    ML 420Cdi Bulkhead Water

    Hi All I have an ML420cdi that is suffering from a lot of trapped water sloshing about in the bulkhead. This was first noticed by my Mercedes in December last year (I actually thought it was a bottle of water in the door pocket making the noise!) on a routine service. I wont go into all the...
Back
Top Bottom