caliper

Does anyone know if a e300 cdi rear caliper will be the same as my e300 td w210 one ?

Hi, can anyone help? I have a clk 320 convertible on a 51 plate and my piston has seized on my n/s rear caliper, replacement has arrived but it has 2 pins holding the pads in place instead of the 1 pin type that I have, will this fit and work until I get the right one if I buy a set of 2 pin...

I am having my AMG brake calipers re painted and would like to know if the AMG logo on them is a decal or is painted on? In any case, anyone recommend where I can purchase a set of decent decals or the template to have the logo 'stenciled' on?

Hello all. I need to obtain the caliper guide bolts for my mercedes 300CE. I need them urgently as one of them has snapped. Does anyone know where i can get these from as soon as possible?

Hi all. Had one of my front brakes off the weekend. Looks like the rubber part of the piston has a small tear. Will this be ok. Or is a repair required ?? Sent from my iPhone using MBClub UK

Maws leaving work tonight, after an 8 hour shift, and upon moving out of my parking space there was a short high pitched squeal coming from the rear. It did it again for the first mile or so when stopped at any traffic lights, and disappeared when the car picked up speed. After driving the 12...

Recently just changed all the discs and pads on my 2004 S55k. Noticed one of the rear pistons was siezed, but managed to push it back with some force. Mercedes want £350 for another caliper. Is there somebody that does rebuild kits for these, or anyone that can rebuild them? Iv had a...

Hi, Looking for w202 facelift c180 front drivers side brake caliper. I know there is plenty on ebay, but just thought Ill ask here first. Thanks

Hi, after a bit of advice. W220 S320 (and others) 4 pot brembos 20704603 & 20704604 Will these fit onto a W209 CLK, From what I have been able to work out they will with CLK55 345mm discs. Would like to confirm though please and thankyou.

Anyone know of any companies in the NW of England that do professional caliper painting? I know it is not difficult to do myself, but I want a top quality professsional finish so not taking the DIY route.

i just had new brake pads fitted to my w211 270cdi and my mechanic said that the bolts with the star heads that hold the caliper onto the caliper seat are very worn so i went to dealer beleiving they were quite cheap but was told they are only available with a brand new caliper , does anyone...

I think I have a bit of a bearing issue, so picked up some new ones on the way home, looking at the hubs there ia lot of crud around the caliper bolts, It looks like these are 18mm bolts (I know this because I have 17mm and 19mm wrenches:doh:) so after obtaining the correct size in the morning I...

Hi guys, I am looking to replace my front discs and pads on my vito 110cdi Mk1 - I am wandering which caliper type i need to be purchasing for. From what i have read there are 2 types of caliper for this so not sure which pads i need. Is there a simple way to tell the difference by looking at...

I'm having trouble removing the caliper. As fitting new discs. I have followed a guide on here. But my calipers look completly different. I undone the 4 bolts on the caliper however the two on the back unscrew but won't come out! So the caliper will only wobble abit but won't come free...

I was going to do the rear brakes on my c220 cdi when the caliper snapped (rotten!!) pistons were seized anyway, so I have found 2 new merc ones for £100!! Except they are for a c180 w202 part number 35/258 same kind though single retaining pin.. Will they fit my car are they the same for the...

Hi there, I'm after a NSF (passenger side front) brake caliper its the LUCAS type, doesn't have to have the carrier. I sheared the bleed screw and would rather put another caliper on. Then I could try to drill the screw out of the old caliper. Thanks

After my last stint at goodwood, noticed that one of the bleed nipples was seeping a little, is this just a case of tightening a little more or can i just unscrew and screw a new one on?? its not leaking from the thread, but from the bleeding end. Brakes is one thing i tend not to tinker with...

Genuine Mercedes Brabus CL 67 V12 Coupe 2002 Front Brake Calipers Alcon | eBay

Hi, Wondered if anyone could advise me as to weather I will need a caliper piston winder tool for my rear caliper when I replace disk and pads. I heard the W203 model did not need one and didnt want to waste the money if not needed?

Looking to change the rear brake pads on my 2006 W203 with Sports Pack. Can anyone advise a suitable claiper reqind tool. I'm considering Pagid Disc Brake Spreader (0-65mm) Would that be any good?