• The Forums are now open to new registrations, adverts are also being de-tuned.

cam

  1. L

    aftermarket reversing cam help....

    I'm new too the forums on here so Hi...:D To start off I have a pioneer app radio installed and is great. I'm trying to connect up a reversing camera but am having some issues. For some reason I can't get a reverse signal too the head unit and don't know where id tap into for this... and...
  2. E

    Cam sensor sl55

    As above,travelling at pace in heavy traffic on m53 engine just cuts out. Much drama and time as it was Friday evening,got recovery to take me to my local Independant.been told a common fault ? Looking at 200 quid.:rolleyes:
  3. M

    slk 170 230 kompressor cam chain

    Hi, does anyone know were the cam chain adjuster is on a 230 compressor engine,? need to remove cylinder head and would like to change chain at same time, does the engine need to come out? Any assistance would be appreciated. :dk:
  4. M

    M112 3.2 V6 Cam Covers Interchangable

    Hi All, Working through the outstanding issues on my 1999 face-lifted W208 CLK one being leaking breather covers, bit of a summer job, anyway thought it would be easier to source a spare set, refurb\clean them and straight swap, I'll also check they are flat, Anyway bought a set from ebay (now...
  5. baxlin

    Power pick-up point and dash cam

    I'm considering purchasing a dash camera, but I HATE trailing wires!! So two questions: What camera should I buy? Where can I take the power from, ie hard wire it, so I can route the cable so as it can't be seen. I anticipate mounting it in what i understand is the only completely...
  6. R

    Leaky cam sensor

    Hi. Any1 know where I can buy those parts ? 1. 1× A 2711502733 das Originale ÷lstopadapterkabel 2. 1× A 0125450528 Steckergeh‰use 3. 1× A 0125450428 Steckergeh‰use 4. 2× A 0015454426 Rundsteckh¸lse 5. 2× A 0135457928 Steckerstift Its from here -...
  7. T

    W 210 diesel pump cam arresting bolt

    I'm replacing my diesel pump on my 1997 E300 Turbo Diesel and need a tool to secure the cam timing on the pump before removing the old pump. Please could anyone suggest where I can get this tool/bolt? Thanks.
  8. S

    m103 cam lifters...how to find the dodgy ones....

    hi does the motley crew have any tips on how to quickly identify the cam lifters which are not working properly? If i took the rocker cover off and started the engine (warmed up) would it be evident from the noise? Or is there a clever shade-tree way of listening with a dutch cap and a...
  9. S

    tap-tap-tap....are my cam lifters telling me something?

    hi all i just put back my rockers after changing all the valve seals and i just noticed that one of the cam lifters seems to be sticking - and of course more so when it's cold. What's the best remedy? take them out and replace them? Are they expensive? Or can something be done? thanks...
  10. D

    C200k cam pully damage

    Hi all, I'm new to this site and know as much about cars as I know about nuclear reactors.. next to nothing. Anyway 8 years ago I opted for a new merc c200k petrol as I wanted a quality car that would last. I loved it from the start and have had a few problems along the way ( reconditioned...
  11. N

    5 second cam belt change

    I'm sure some of you may have seen this before, but it's fun. Replacing the fan belt in 5 seconds - YouTube
  12. IMD

    SL500 tappets / cam oiler noise - suggestions?

    Hi all, I have a 1997 Sl500 and over the last 2 months there has been an increasing noise from the engine. This started after I had an oil service, in which they flushed the engine. I'm assuming that it may be a broken plastic cam oiler tube, which is a common fault. I've been...
  13. Tubaclarion

    Clk 230k cam magnet oil leak

    When driving my car the other day, the engine management light came on. After checking posts on the forum, I looked at my cam magnet to discover that the cable connector was full of oil. I now suspect that it has travelled down the loom, an experience so many others seem to have had. There...
  14. G

    Merc vito cam cover

    Hi How easy is it to remove cam cover? Does the injectors need to come out first
  15. John Jones Jr

    Cam (VVT) Magnet

    Guys, Is it possible to test off the car, the ubiquitous (A1190510077) as found on M111, M104's etc. I was also wondering would attaching 12V power supply operate it & if so should I expect a 'clicking' or some such noise? Cheers in advance.
  16. B

    Cam covers torque settings 55 AMG

    Does any one know why these cam covers leak, done mine 3 months ago and can see slight oil leak again both sides, just ordered 2 x gaskets from merc if anyone knows some magic trick let me know please. I think the torque setting is 9nm can someone advise please
  17. Pitts Pilot

    Got a V1000GS car cam?

    Hi I have a V1000 car cam and the remote control for setting time and date, etc, has broken. I've seached everywhere on the Net for a replacement, but no luck. If anyone has a V1000/V1000GS car cam, could I pop round with my universal remote and spend 5 mintes "Clonning" it? Thanks :) .
  18. W

    Helmet cam in a GT3

    A really good driver's perspective video. No distracting backing track or commentary, just lots of great technique to take in :) 20V_Uf5m3Nw
  19. 300CE

    M104 cam cover 300CE24 / 300TE24 Shot-blasted and powder coated red

    Mercedes Benz M104 cam cover 300CE24 / 300TE24 | eBay
  20. H

    Cam Sensor Oil Leak

    Hi first time using this forum and came across it due to necessity. How to clean the ECU properly on my 2003 C230k. Is it enough to clean the pins or do you need to get inside it somehow? Any help would be most appreciated. Mark
Back
Top Bottom