camber

Hi guys since lowering my E via springs it is scrubbing the inside edge of tyres badly due to neg camber, ive have bought camber bolts from merc and was hoping you guys could explain on how to fit them, do's/donts pitfalls etc. I have access to a car lift. Do I need to support bottom arm when...

hello, So after i replaced every component on the front end of the cls55, i took it to get 4 wheel alignment. After a " we couldnt manage to get the camber in spec" type conclusion i had a nosey when i got it home. The results were not good. The lugs inside the bottom arms bush at both...

May I have some advise please folks (and apologies if this subject has been covered in some length before - Couldnt find a previous CLK topic for it) I'll be getting the alignment (camber/cast/etc.) on a hunter machine next few weeks but aware I need to pick these up rear camber bolts before...

Hi guys 1st post here, hello. I´m experiencing the well known exaggerated pulling left in a used 2003 CLK I bought 3 months ago and I don´t know where to find help. Im in Dublin area. wheel aligment is out of range for caster camber currently in front left wheel. I visited several...

Hi Folks, I am currently enjoying the 2010 C63 AMG PP which I bought last week, as the 15.8mpg testifies! I have been reading some of the posts about premature and uneven tyre wear and am currently looking into purchasing adjustable (after market - K-Mac) toe / camber bolts and having the...

I've noticed excessive tyre wear on the inner of both front wheels so took my CLS 320cdi for a full Geo test (they are great by the way, well worth £30) Found that i have an issue with too much negative camber. see attached readout. Anyone else had the same issues before i start to...

Can anyone recommend a full alignment place in the North East (Not MB Teesside- I wouldn't give them the s--t off my shoe or Prestige Stockton they always seem uninterested, which is a shame as both are about 4 mins away). Unfortunately the most recommended people on here (WIM) are too far...

I have two Camber Correction Febi Bolt Kits which I bought with the intention of fitting to my 2007 E320 CDi Unfortunately I've picked up an injury and I am unable to fit these. I had to have my Indy do the work but he will only fit genuine Mercedes Parts hence the reason for selling these...

Right can someone plainly explain how the camber actually adjusts when upgrading to camber correction bolts? I have just wasted a quite good pair of Pirelli Cinturato's due to the neg camber curse. I am aware that the inner bush in the bottom arm has, I believe, four raised notches inside it...

Hi, I had some suspension work done at the front of my car some time ago (lower/ upper ball joints, suspension control arm) but only had the front wheel tracking done (not very reliable/ accurate set up). Recently when the car was lifted on the ramps (to check the wheel bearing play), I found...

Hi, I have fitted all new suspension (lower arms, dampers, drop links, top mounts and top and bottom ball joints) to the front of my CLS. It has always munched through the inner edge of the front tyres long before the rest of the tyre is worn out, so I fitted the grooved camber adjustment...

Hi guys! After lowering my car the rear and the front are out of alignment. Today at wheels in motion been told that we can sort out the front with adjuster bolts from dealer, but to sort the rear I would need the adjustable camber rear arms for clk55 w208. So I'm after the adjustable rear...

I drive a 2012 C180 AMG Sport. I got told by Mercedes that my right lower "camber arm" is worn out and needs replacing. The whole suspension needs to be recalibrated. Is it expected to have to replace part of a suspension this early in the car's life? I never had to replace these on any of...

Which one is best? Any experiences? I only need a bit of toe in to the rear wheels

After driving the car for a week it didn't feel as planted as i hoped it would, a quick trip to my nearest tyre place (A1 Tyres) confirmed my suspicions. Before After Apparently the W204 doesn't have adjustable rear camber which i find hard to believe, if this is the case i'm a...

Hi, I kerbed the merc and ran it over a bell bollard :( The rear wheel is now more in at the top and looks like this What might I have broken? Help appreciated. Tom

'ello, greetings from the colonies :) I have a delightfully rusty and thirsty CLK 430 coupé with about 170 000 miles. I enjoy greatly the seats and engine. I had an issue with unacceptable inner tyre wear on the rear to the point of shredded tyres on the inside :) The camber was obviously...

Some advice sought. The ML has taken a heavy bash to the near side rear wheel which has bent the camber arm. We have got a quote for the parts which we can swallow but the dealer is looking to charge over £600 for fitting and alignment. They told the misses that the figure includes over two...

Hi a few weeks after I had my ML270 I noticed that the rear drivers side wheel looked like the top of the wheel was leaning out a positive camber and have now noticed that the outside of the brand new tyre that was on it is starting to wear. I've been quoted about £150 to rectify this and was...

a few days ago I replaced my control arms and after went to get a proper alignment... but now I feel my car pulling right... I believe I placed the camber adjustment bolts the wrong way and now camber is not properly set... should I give any special recomendation to the alignment shop? I...