compressor

I'm considering changing the timing chain and tensioner on my '84 280CE (M110), myself. It seems the MB spring compressor is very expensive, and many people seem to use home fabricated versions. I've found this Sealey device online: Sealey VS168 Valve Spring Compressor Lever Type OHV/OHC...

Atlas Copco GX4 200ltr tank, very low hours, 3 phase. Same as this one: Atlas Copco GX4 Compressor | eBay (the ebay ad is noting to do with me I might add) £500

I bet we have pleanty ppl here who use air compressors in their workshop and I would like to here a little opinion about what should be installed in a garage with 3 lifts tyre machine and possible spray booth for painting. I was looking at those below and I wonder if you could tell me what...

Any ideas on where to obtain a Klann type inner spring compressor without costing the price of the car?

Hi all, Checking the air con system before regassing, the air con compressor can easily be turned by hand but it does make a noise (see vid) - is this normal? Does this mean it needs replacing? Bearing in mind there is no gas in the air con system at all as the condensor is leaking so will be...

Would a 1997 air con compressor fit into my 1999? Mine is starting to become noisy and believe it's on its way out! (both cars w202).

right guys im after some information on my 5.0 V8 its aproaching 90k miles and almost due its B service, do these need anything special doing at that kind of mileage like cam belt (are these belt or chain driven?) etc. Also i need a new AC Compressor as its leaking from there any suggestions...

Meaning you have to beg, steal, borrow a special, Mercedes one, if you don't want to have your head taken off. Is this just a Mercedes thing or does the same apply to other manufacturers?

Need a spring compressor tool to rent, one that is suitable to remove rear springs off an SEC. Let me know what you have. Thanks Haris

It’s leaking oily green fluid so I guess it’s a replacement. Can it wait until next summer or do I have to attend to it now? TIA Neil

Once in a while the drive belt for my air con compressor will slip. Nothing major, the noise is just a bit embarrassing! I can see all the belt needs is to be tightened up a little, but thats where my problem starts. On early W126's the belt could be tensioned by using nothing more than a 19mm...

Must be cheap or free but can collect within 30-40 Miles Bolton Manchester. Bought a Tyre Changers and my little 1.5hp compressor is fine bar when it comes to breaking the wall of a tyre. So need somthing a little bigger...or a lot bigger... Must be 240v not 3 phase Not bothered if it needs...

Can anyone lend/hire me a through the spring type road spring compressor ? Id be quite happy to pay for courier both ways. OR, can you sell me a secondhand one ?

I need a spring compressor to change the springs in my W210 E320, does anyone have the special one I could borrow (if not too far from Cambridgeshire) or buy? Thanks

In a bit of a hurry yesterday I managed to clip a large stone on the apex of a bend:wallbash: The front felt heavy so I pulled over....yep punctured tyre. I pulled out the funny looking space saver only to realise that it is kind of folded flat to save even more space, saw on the side of it...

Hi Newbie to this Forum. Have a 1998 W202 C240 Sport Auto. It has been great for over 3 years with no problems, but now the air-con is U/S, and after a dye tracer test I am informed that I need a new compressor (where have I heard that before). The dye was showing leaks at the inlet and outlet...

I have my old front spring compressor for sale. Absolutely nothing wrong with it. Works perfectly. It is for 210's, 202's 140's 124's etc. £50 let me know via PM.

Had Compressor replaced on the advice of aircon workshop (new) due to no A/C and regassed. Now find compressor not engaging no charge, so my guess is electrical fault. Checked fuses appears to be OK. Before i spend more big bucks can someone advise best route to follow re the most likely...

Hi guys, Just had the airmatic compressor replaced on my car from a local indy, for the first few days everything was fine, then now when the compressor kicks in it is very noisy and a vibration through the pedals can be felt, the car still rises perfectly however. When the pump was fitted...

All I was thinking about going for a compressor to run maybe the following:- 1) Impact Wrench 2) Nail Gun 3) Small Spray Gun 4) ?? Any advice on what i should be looking for?