Are the finned differential coolers standard on the c63 amg facelift even if it has no lsd?
this is the part number: A1713510108
this is a picture of what I am talking about:
So im running a nice tune from msl that takes her to over 700bhp... the problem is with any prolonged use the oil temps and intake temps do start to get up.
So to address this is there anything off the shelf that can be used? or would i have to go down the custom route?
I want to...
Hi guys just wanted to ask if anyone has had a familiar problem in their cls55 as mine.
In sports mode you accelerate but as you build up speed say to 80+ you begin to loose power? and if you lift of and reaply you still don't get full power.
Is this the chargecooler pump not keeping the...
Hi, we bought ML250 a week ago that is 2.6 year old (register in Jan 2015). were very happy with the car, but decided to check it to feel safe. The check reveals Engine oil cooler oil leak (photo attached). The car is still under manufacturer warranty. We are not sure should we just return the...
Long time reader, first time poster. Spent a lot of time browsing the forums prior to buying my first MB, and became the proud owner of an '04 S211 E320 a few months back.
The car is brilliant, but over the last month I noticed a vibration under load, which thanks to this...
Well yep you guessed it, My Engine Oil cooler is leaking.. Deep Joy,
Part Number i believe is 2115000400 made by Behr i think
This is a different unit it would seem to the w220, and r230 55k's, they are very similar but have a electrical switch/sensor off the side of them.
what is the cooler that sits below the other small cooler that does the supercharger?
Reason I ask is that the mount bracket that holds this in place has detached itself from the bottom of the supercharger cooler rad. Ive made a temp repair for the moment, but ideally id like...
thought id make a start on some of the jobs on the cls.
First on my list is the pump for the supercharger cooling system. The previous owner had kindly supplied me the replacement part when he sold the car, so it was just a matter of fitting it.
I suspected the old one was...
Well after much reading and procrastinating, I decided to plunge in to the nightmare job.:eek:
Having bought gaskets, torx/star sockets in 1/4, 3/8, 1/2 and ratchet spanners I was just waiting for a dry day as doing this outside.
I couldn't find ANYTHING on net after a week of searching, so I...
This is my first post on this forum. I have owned my c220 for just over 2 years now. It has been a great car but a it's now having a few small issues. The main 1 being is that the oil cooler has started to leak. I was just wondering is this common fault and do they have an expected...
I have a 59 plate E250 Saloon. I have a coolant leak from the hose that leads from the top of the oil filter housing down towards to the oil cooler. Oil cooler I assume is attached to the oil filter. The leak isn't from the top of the hose on the fuel filter housing but the bottom section that...
I replaced the oil cooler seals today due to a leak.
A complete pain of a job due to the tight space.
Unfortunately managed to lose one of the bolts.
I looked high and low and could not find it.
Anybody know where I can get a replacement quickly.
Sent from my SM-G935F using Tapatalk
I'm in the middle of changing the hoses on the oil cooler on my 2004 E55 W211 because they've decided to fail. ( Pain of a job :wallbash: )
Does anyone know where to add fluid when the job is done ? As i have lost about 1 litre with the leak and taking off the hoses. I've been told it can only...
Maybe a long shot but has anyone got a spare hose lying around. My gearbox started going weird and I found this hose had been leaking & the level had gone seriously down. Hoping no damage.
Looking for some adviseplease
I have a very sorry looking transmition oil cooler and i am going to change it out.
firstly can i just unclip the hoses and swap them over and then add some teansmition fluid to replace the amount thats going to spill onto my driveway?
also because the...