I am new to this site so please bear with me
I cannot find the 16 pin obd2 socket on my car although all cars since 2001 should be fitted with it.The car was reg. in May 2001.Any ideas
I have the round socket in the underbonnet fuse compartment.
Is the car obd2 compliant and will the adapter...
Due to upgrading, I am selling my trusty SnapOn MT2500 Diagnostic Scanner
Much more than a generic code reader, it also does "activations" so allows you to test operation of relays, valves modules and more - also does things like code TDCi injectors, and much more.
Comes with Vehicle...
Can any one tell me where this is please on my car? Its a 1999.
I cant find a round plug under the bonnet, any help or photos would be much appreciated.
Thanks in advance
Barny.
i bought a diagnostic machine etc the disk states 8 16 etc pin plug but my car has a 9 pin plug anybody shed some light as to where the leads plug in to
hello ,I have a s320cdi and when accelerating hard I get the check engine light and loss of power .if I restart all is well ,I used a genden code reader and got codes u0700 and u0b00 lve been searching on the internet but no info , can anyone help . thanks
I added Millers diesel additive to my W203 yesterday and drove 25 miles with no problems. From start up today and all day the engine diagnostic light remains on.
The car continues to run perfectly. Checked under the bonnet and everything seems fine.
Can this be attributed to the diesel...
Ok, I'm thinking it would be good to get some OBD2 / Carsoft / ELM327, etc software / hardware to read & reset any faults that may (well) develop on my ML.
Truth is I haven't got a clue what to go with and am having a terrible time figuring out what you can get & what I should get for the Merc...
Firstly, thanks Malcom for your suggestion of taking my coupe to a Bosch Specialist for a diagnosis, at £98 incl vat it was good value . I went to one 5 minutes from me and he kept the car two days and ran all his magic connections etc to it and seems to have identified problems with the Warm...
Does the dealer use the OBD-II port?
I am having issues with the OBD_II port on my car. The reader I bought cannot connect to the ECU.
I tried about 6 months ago and couldn't get a reader to connect then, so went to the dealer to and they were able to pull the codes for me using the tools...
I finally worked out how to access the COMAND Diagnostic Menu from my 2.5 COMAND. Prior to the MY2001 update you could use the Mute+1+3 button press method from SYS. Once I'd upgraded to MY2001 that simply wouldn't work. As I have no Aux input that wouldn't work and I tried switching to Tape but...
Hi Guys,
Kinda new to this so bear with me.
We currently have a 2002 A140 Elegance LWB 63000miles. Last february the SRS light and Engine Management light came on. We stuck it into our local independant MB specialist with all the correct error code equipment And diagnosed a seat sensor fault...
I put a wittar towbar on my W210 and after driving it I heard noises from the rear of the car. The exhaust tailpipe was banging off the bar and I drove it like this for 40 miles. There was enough meat on the towbar to grind off the offending piece. The trouble is now the engine diagnostic lamp...
Guys
Do any of you know how to access the error codes on the digital climate control panel?
I've found out how to do it on a W202 but it's slightly different on a W203 so it doesn't work.
Thanks
Csoft MB 7.4 working with KL interface,100% tested,works A,SLK,CLK,C,E,S,
SL,G463,W163, Vito,Sprinter - Software + Interface schematic
Software with interface
Csoft BMW 6.1 + 6.14 working with K interface,100% tested,works all BMW up to 01/2003 - software +
interface schematic
Software with...
... in this months (Jan) issue of Car Mechanics magazine.I'm not sure how many people are interested in DIY on this forum but the article is worth getting as it covers how to diagnose the 3 common faults on this model.
adam
I have a sdflash telematics update disk that i am led to believe i just put into the cd player and it can update the system.
Does anyone know how to make the cd run???