distributor

  1. merc69man

    Bosch Fuel Distributor 0438 101 012

    Hi everyone, I own a 190e 2.6 and I have stripped down the fuel distributor to replace the seals and diaphram and on dismantling it I found that the filter which goes on the metering barrel tube has a hole in it. Does anyone have one of these filters or know where I might be able to get one...
  2. merc69man

    Bosch Fuel Distributor 04380 101 012

    Hi everyone, I own a 190e 2.6 and I have stripped the fuel distributor to replace the seals and diaphram. On taking it apart the metering barrel tube has a filter around it and mine has a hole in it. Does anybody have a filter or know where I might be able to buy one. I have tried a lot of...
  3. demetrios

    R129 distributor caps

    Hi all. Firstly the search feature won't work, keeps closing dialogue bar when I try to type so had to start new thread. Right Haven't driven the 500 for 3 weeks, been starting it, letting it warm up,slight revving then switching off. Took it for a blast up m6 for a 25 mile round trip...
  4. N

    190E 2.3 16v Cosworth Fuel Distributor * URGENT *

    Good morning all, I have a 1987 190 2.3 Cosworth currently sitting in a BOSCH service centre with a faulty fuel distributor. I need a new/refurbished one. Can anyone point me in the right direction Thankyou in advance Chris cdking26@aol.com or 07502-333315
  5. E

    Euro Car Parts are an official Distributor for Clutch Masters products

    Clutch Masters clutches are specifically designed for varying stages of high performance and/or racing uses. From the street performance enthusiast who requires more grab than a stock unit while retaining everyday drivability, to the racer who needs a clutch to survive under the grueling...
  6. Marvin16x

    1988 190E 2.3 – Distributor oily, why?

    Hi everybody, seems like I have nothing better to do at 1 am than thinking about the distributor of my old 190 and how it has been oily for a few years. I found it to be kind of submerged in engine oil about 2 years ago. It looked like this: After a few minutes of cleaning I got it back to...
  7. H

    W126 Fuel Distributor repairs

    I am about to start working again on my 1988 500SEC. I had problem with the Fuel Distributor and bought a repair kit but messed up the rebuild. I had spare 560 engine and used the Fuel Distributor from that engine but that one is also giving me problems.. I found "Remanuctured" unit on...
  8. G

    R107 Distributor cap removal

    First job I come to do on my, new to me, R107 and I fail! I have a 1986 300SL (R107), I can't understand how I can undo the lower bolt on the dissy cap. The top two have good access, no problem. The lower fixing can't be reached with a normal size Allen key socket, but an extension means your...
  9. G

    R107 Distributor cap removal

    First job I come to do on my, new to me, R107 and I fail! I have a 1986 300SL (R107), I can't understand how I can undo the lower bolt on the dissy cap. The top two have good access, no problem. The lower fixing can't be reached with a normal size Allen key socket, but an extension means your...
  10. R

    Spark Present but not when Cranking w111

    Hope one of you gents can shed light on this problem. I am trying to test a 220 engine from a 1964 220SE w111. I'm using the electrics from another old Merc to supply the spark. So, I've basically wired up the starter and coil from the other car. I find that I can see a spark on the plugs when...
  11. D

    W124 300CE Fuel Distributor

    As in the title, im after a W124 300CE Fuel Distributor in good working condition. Regards, Dan
  12. M

    Green flakes in distributor cap? 1991 500SL R129

    Hi everyone. So I replaced distributor caps and rotors not long ago (few months). I opened them up the other day to see how they were going and I noticed that on the left hand distributor cap (and on the rotor point) there was quite a bit of green flaky oxidisation that had built up, not so...
  13. M

    Green flakes in distributor cap? 1991 500SL R129

    Hi everyone. So I replaced distributor caps and rotors not long ago (few months). I opened them up the other day to see how they were going and I noticed that on the left hand distributor cap (and on the rotor point) there was quite a bit of green flaky oxidisation that had built up, not so...
  14. S

    bosch fuel distributor quiz

    right, fingers on buzzers, your starter for 5 points. What should a skint brit in Lebanon do if his fuel distribtor on an old 300E is packing up, according to his mechanic who says this is the achiless heal for this model. Is it 1) look for a used one from a UK breakers? 2)get a repair kit on...
  15. R

    Wanted fuel distributor

    Hello I'm looking for a fuel distributor for a 300 CE 6.0 The bosch part number is 0438101016 has anyone got one for sale or recommend someone who can rebuild it for me
  16. PhilDR

    Weistec Supercharger for 55K (M113k) Engines - Official UK Distributor

    Hi having undergone serious testing and proving we are now happy to announce the Official UK release of the Weistec Supercharger upgrades for the M113k engines found in most of the 55k vehicles.. 2002 was a milestone for Mercedes and European sports car enthusiast. The M113K can only be...
  17. Z

    190e w201 w124 Distributor removal help....

    Hi, Want to replace the whole distributor, have released the top hex bolt, Dizzy now twists slightly but will not come out. Is there a pinch bolt on the side, I can not see one.. Any tips help please....:fail Thanks
  18. J

    R129 SL500 Distributor Advice please

    I have owned my 1993 sl500 for just over a year and during that time have suffered the misfire due to moisture problem that seems common to this engine. Whilst recently cleaning the drivers side cap, I noticed that the wires that go into a two pin plug on the side of the distributor had pretty...
  19. M

    Repair (rebuild) a fuel distributor

    Hello everyone, I've been reading an interesting document detailing instructions on how to repair a CIS fuel distributor http://www.cis-jetronic.com/public_doc/07.3-0997-06.pdf Has anyone tried doing it this way and what problems might arise? Is everything detailed clearly? Or is something not...
  20. kieranswood

    Stuck on the bottom bolt of the distributor cap any help appreciated

    I have my replacement cap and rotor but have got 2 out of the 3 dis cap bolts off, but the third on the underside seems impossible to get too with any Allan key or bit can any help? Thanks
Top Bottom