• The Forums are now open to new registrations, adverts are also being de-tuned.

error

  1. P

    Error code reader fail.

    Hi, just before Christmas I bought an Ecutool EC601 error code reader, to read codes on a June 2004 W211 E220cdi A/garde, from Mike West at Gendan. When I tried to use the unit I got a communications error, and having had a look through the user manual the same error was explained. However...
  2. B

    ML270 error lights

    Ok guys, just bought this car, 98,000m been back to garage several times now, and been told the problem is fixed... but it keeps coming back.. getting a bit tedious now!! Any help or advice would be gratefully received. Ordinary driving, any condition, after about 20min the BAS/ESP and ECP...
  3. Palfrem

    Keep getting Script Error message in IE

    Any ideas please chaps? This keeps coming up about three times on each new page
  4. D

    W215 2 little problems (parktronic and error message tone)

    Hi all, I have a W215 2002 CL55 I have 2 little problems I'm trying to get to the bottom of the 1st is the parktronic seems to be dead the button dose nothing (no light) and the system dosen't activate when selecting reverse, I've checked the 10a fuse under the back seats and I've checked...
  5. G

    oh no...dreaded Error codes are coming

    My '99 C230k has been running quite well up until now...but I've just been hit with 3 error codes, plus my engine and transmission mounts desperately need to be replaced...I wonder how much this is all going to cost. The 3 codes are: P1519 Camshaft timing function chain, right link...
  6. I

    Boost pressure too high (error 0105)

    The diagnosis MB from this error: 0105-001 Check the pressure transducer B5 / 1. The boost pressure is too high. Check (instruction from stardiagnosis machine): The atmospheric pressure and the suction pressure (with ignition ON and engine off) should not differ by more than 30 mbar...
  7. Lee C63

    Error free Daytime running lights

    Has anyone fitted LED daytime running lights on the W204 or the LED license plate lights? Just wondered if there are any opinions or horror stories with these. iJDMTOY Car LED Lights Installation Pictures Gallery For Mercedes :dk:
  8. S

    Audio 20 display error.....

    Good Evening, could any one tell me how to rectify the following message that is being displayed on my Audio 20 screen,after the key has been inserted and the engine started. "Please switch on the ignition to display the clock" I noticed that the time in the read out is stuck on 14.29 from...
  9. paul73mt

    NTG4 Map Error

    I am running v10 on my NTG 4 and was just wondering if my map is wrong as at Stansted Airport there is bassingbourn Roundabout but on my map Bassingbourn Road it partly greyed out so mt sav nav routes me a different route. I was just wondering if some one could check the map n see if its the...
  10. doggz1

    w210 e320 cdi intermitent p1354 error code

    Hi can anyone shed any light on this frustrating p1354 crank sensor synchronization problem that keeps intermittently re accruing :dk: So far i have had the symptoms of crank sensor failing ie wont restart when hot so i read the codes and it read p1354 synchronization between crankshaft and...
  11. T

    W221 S320CDI EGR error, smoke and no power

    Dear members, I am Tomba and new here. I need someone opinion about a car that is in our workshop which we can not solve the problem from. I is a S class from 2006/04 with 260.000km/163.000 miles. Histroy: - Owner bought the car and let it inspected by a MB dealership, MAF housing and some...
  12. V

    vito error code 2136 &2051

    Hi ive plugged my vito 111cdi (w639) which wont start into a snapon diagnostic kit and it has come up with the following codes 2136-cylinder 4 short circuit, glow plug 2051 - rail pressure exceeded can anyone please help with the cause and whats needed to fix it, id be more than grateful...
  13. M

    Error on dash when setting off

    W211 e270 2003 estate flashes up errors on the dash when I setoff above 10mph. They are ABS light comes on and ESP,BRAKE, heavy steering and ABS in the dash. Any ideas what this could be? Mahussain
  14. S

    Vito error codes - help needed

    Hi After buying a 2004 Vito with a perma on accessory light lit up on the dash I replaced faulty brake bulb and loose connection on rear number plate light. That seemed to of fixed that issue and then soon after - the abs and traction control lights started to light up on the dash... Took...
  15. Dave Richardson

    LED Indicator bulbs that work without canbus error

    To anyone thinking of upgrading to LED indicator bulbs, I purchased a set from HIDs on e bay & fitted them in my W203 coupe without any errors or flash speed change . Ok! at first sight the 60w may look scary but trust me when fitted it's not the lights are just so mush better...
  16. G

    error code

    Hi all I have a c320d and its in limp mode, em is on and i took it to garage and he told me the error code is P2015, ? does anyone know what this is?
  17. C

    Error code p1605 curious

    So just had this code come up...with the description.. P1605 "Can acceloration info for poor road recognition from ABS speed sensor" Can any good fellow please decipher that for the none mechanically minded and tell me how to remedy it...many thanks guys 1999 CLK 320 coupe
  18. 2

    2001 w210 dvla error?

    Hello all. Advice much appreciated. 2001 mb e320cdi. Classic according to dvla v5. However Wings say elegance select, Interior says leather heated, command, front end rear park distance control, nokia phone kit and so forth, so not a classic spec by no means. Put my vin into the russion vin...
  19. atsa2013

    what error free HID kit to use??

    Hi all im gaving trouble finding a garage that will install an aftermarket hid kit that will not show errors few places i visited refused to work on my car saying its not posible unless i buy the original mercedes hid headlights :( does any one have any ideas or solutions ...thanks (W211 facelift)
  20. F

    W203/AUDIO 20 CD Changer error

    Selecting CDC on the Audio20 starts up a scan of the magazine that stops at CD3, returns to CD1, CD2 and stops at CD3 again and stays there forevermore! at one stage I got a CDC ERROR displayed while playing with the << >> keys. Glancing thru' the gap between the magazine and the body of the...
Back
Top Bottom