Hi. I have this car. C180 classic se. Petrol automatic. 5 door . 2005 with 79k on the clock.
I was driving when the car slowed down almost to a stop. I pulled in and it did stop then cut out.
No warning lights are on all looks normal but it won't turn over. Same sound as...
My error message "dipped beam right" went away 2 days ago was replaced with "no malfunctions" and light started working again.
However got myself a small tool kit together and removed bottom plastic engine cover as suggested by Kuazizul. access no problem this way. Removed ballast unit cleaned...
I folks, first post here and hope to get some help. I have a SLK 200k 2007 It has just failed the mot, i have very sooty exhaust pipes, the garage has said it requires a new intake manifold air control actuator bank 2 supply voltage low? He says these are around £750 +. Anyone have any views...
Been on since I had to jump-start the car which I understand can happen on the merc. (BTW - its a 2001 A160).
Bought an OBD reader off ebay and there was a fault code. Managed to clear this. Trouble is today its back - first time I used the car.
Couple of questions:-
1. Is Check engine...
Whilst changing a tyre on my R129, I was aware of a spot of fluid, (which turned out to be brake fluid) on the ground. After a quick check of the fluid level and the drive, I found the culprit. The front end of the high pressure brake pipes feeding both the left and right rear are leaking, (or...
Have cleaned out the black death, re installed the injectors.
Had quite a lot of splutter before it would run.
The EDC light comes on under heavy acceleration and the engine dies completely. Slip it back into park or N and it restarts again.
Had a mate run a code machine and we get this...
Hi my car failed on smoke test
2008 S320 diesel,
Smoke was 5.340/m
Limit is 3.00/m
I recently replaced a cracked inter cooler hose so hopefully this was contributing to the problem, but is there anything else I can do to reduce smoking?
Car was nice and warm for test?
Thanks
C
Hi all
Just waved goodbye to my 507 As it left on the back of a flat bed truck after what sounds and looks like a power steering pump and/or rack failure. Fortunately I was about a mile from the house when it happened.
I am however very worried as I had just changed tyres to 245 fronts and...
Hi, just before Christmas I bought an Ecutool EC601 error code reader, to read codes on a June 2004 W211 E220cdi A/garde, from Mike West at Gendan.
When I tried to use the unit I got a communications error, and having had a look through the user manual the same error was explained. However...
After a (mostly) successful thermostat swap yesterday, today was discs and pads.
Had all the bits ordered from ECP.
First thing I noticed was that no picture or howto that I've seen anywhere looks like the calipers fitted to the front. It was soon pretty clear that the pads I had were not...
Hi all
I've searched the forum far and wide and not found an answer too my problem all be it some users have similar problems,
My exterior boot release is no longer working when you pull the handle nothing happens all you can hear is the switch clicking.
The boot does open by the fob and...
Well the bulb fail warning lamp has decided to come on even when my lights are not on. Have checked all around and no bulbs out including reverse and brake lamps. All bulbs are tight in their holders too. Any ideas chappies ?. Cheers, tony.
My drivers side window and seat has stopped working as has the passenger side
Is this a similar problem to the passenger ie a box needed? Is it a specific one for the car?
Hi everyone, I am new here and would like some urgent help. Only bought my car 1 month ago, last Sunday due to heavy rain could not avoid going through some puddles on road. Water came into nearside footwell, today 3 days later got into car a heater blower would not work. Took it to garage...
I posted on here a year ago saying how happy I was with my 2000 Almandine black CL500. And, for almost exactly a year I had fairly trouble free motoring aside from the parking sensors failing and central locking intermittently failing.
The ABC light came on then went out, I ignored it as...
Hi all,
My c32 just went for its mot and it failed on emitions. The local garage tweaked up the mixture through star to get it through the test but I want to sort it permanently.
I recently fitted k&n filters but apart from that it is completely stock.
Should I be getting a remap or...
Just had my R129 fail the MOT on emissions after the secondary cat delete I had done in April. Car has done under 700 miles since the previous MOT, which was fine.
Luckily I'd put it in early just in case - I've got till the end of the month to get it sorted.
I've not heard of anyone else...
When I bought the C63 AMG PPP Estate, I was immediately overwhelmed by the amount of spurious information it was conveying to me. It flashed and beeped and vibrated warnings like some kind of health and safety Tourette’s sufferer. Gradually, one by one and with much detective work I have either...
my 1999 e430 has just failed its mot on emissions
CO 3.463%
HC 288 ppm
LAMBDA 0.882
tester thinks it could be the cats but when he was testing the car it did smell
like it was running very rich:fail
any help would be gratefully received