gasket

Hi, I have an 80's set of Remotec wheels for my SEC, they are the spoked effect type. The large centre cap covers the centre of the wheel and the bolt area, and its meant to have a rubber ring around the edge so it seats against the wheel nicely. The problem is that mine are perished and I...

As above. Surplus to requirements. £16.00 posted. Cheers.

After traveling for 15km only, I realized my temperature gauge wasn't working then I stopped but the engine was really hot...five minutes later I tried to start the engine and the reading went up to about 90 degrees Celsius what does this mean?. It is a 1996 C200 v-boot 111 engine

HI all, can someone please confirm which gasket do I need for my w124 300D pre-facelift, autobox 722.415: *1 Mercedes Automatic Gearbox Filter and Gasket Seal KIT W123 W201 W202 W124 R129 | eBay *2...

Anyone have a rough idea how much a head gasket is to replace on a 04 A140? Coming back home on the motorway last night, I had an OIL HI warning sound. This morning I went to check it and found mayo and water in the filler cap:wallbash: Any ideas anyone? Cheers

hi changing my oil this morning on my 1999 Merc E240 ( v6) and noticed lots of mayonnaise on the dip stick and cap I had only checked it last week and all was its usually shiny self. I then went and checked the coolant which was also very low so in the space of a week it looks like I have a...

I have a small leak that looks like its coming from the drivers side of the rocker cover. It's not major but causing a bit of smoke. I'm thinking the gasket needs replacing. Any tips on doing this?

I have a c36 which I purchased with a suspected head gasket leak. Plan to do this job but need to buy a head gasket and any other seals I will require. Where should I get these from? I hope to get the head off and back on in a long weekend. Any advice welcome. Thanks Rob

Hi guys while on the motorway my car said add 1 litre of oil at next fuel fill up. I pulled over after a mile into the services and when I lifted the bonnet There was oil every where, passenger side of engine bay all over the wheel + disk and all up the side of the car. Took of the expansion...

I am think of starting the head gasket job on an M104 engine Whats the job like to do ? How long does it take ? Any tips ?

Hi Using about a litre of water a week and lots of white smoke coming from the exhaust so I've made the decision to change the head gasket. Done a lot of reading on this and other forums so am more or less ready but have a few questions I hope someone can help with: 1. I have a large slide...

Hi After 250,000 shes ready for a new head gasket... Does anyone have any advice or tips, things i should look out for or anything similar...?

OK, so doing my usual checks under the bonnet last week and discovered some sludge under the coolant filler cap :eek:, needless to say, was a bit shocked. Seeing this, checked the oil filler cap, no sludge on there. Checked the dipstick, nothing there either. temperature is fine, climbs quite...

Hi I HAVE A E240 W210 1998 HEAD GASKET BLOWN .WHAT I WOULD LIKE TO KNOW THE TORQUE SETTINGS FOR THE HEAD BOLTS PLEASE THANK'S

I HAVE A 240 E W210 1998 HEAD GASKET BLOWN .I HAVE GOT THE NEW ONE'S AND BOLTS BUT I DON'T KNOW THE TORQUE SETTINGS?AND I CAN'T FINED THEM ON THE NET ANYWHERE:wallbash: .SO I WOULD BE GREAT FULL IF YOU COULD HELP ME OR ANY MEMBER WHO MY HAVE THEM COULD PASS THEM ON THANKS.

Well this looks like a good forum, just looking at the first page all the posts have replies! Excellent. Well I've just got my first ever MB, an old W201 C220 estate with what should be a lovely reliable non-turbo diesel in it. Now herein lies the rub. I got it home and the head gasket blew. Ok...

Ive got a leak at the front of the engine coming from the gasket underneath the timing cover. I've started stripping things down to replace the gasket. Taken the distributor cap and rotor arm off but I can't get the bracket on which the rotor arm is mounted to budge. Removed the torx screw...

hi all . i am looking at replacing my 2000 108 cdi for a 07 or 08 vito lwb or xlwb. so whats the van like ? can i get a sheet of 8x4 standing up ? what engine shall i get ? etc etc looked at the reviews and they slate the vito big time. main problems rust rust rust no warranty work ( stone...

hi all , any pointers in the right direction ? as you may remember i have been running around for 6 months with seal up in the water of my van. was going to replace the van in the summer but unfortuatly yesterday it went through to the oil being burnt and i stopped it. have booked tomorrow off...

Seen as both of my head gaskets are seeping oil and ive been quoted £1600, i was wondering how much of a big job it is to do myself? any step-by-step guide anywhere? or anyone want to come n help :P lol.. thermostat needs doing too so would it be better to do that at the same time as the heads...