ignition

Hi , Im having problems again with dizzy cap. I think its time to invest in OEM ignition parts. I cant access EPC and need Mercedes part numbers for distributer cap rotor arm parts to make leads coil. id really appreciate it if someone can help out. kind regards

hi All Only just joined and would like to pick your brains. Bought my first MB in June 2013, new A200 1.6 Sport petrol, manual. Love the drive of the car and the shape. I'd driven mainly Hondas up to that point and had to get used to the 'spongy' accelerator and higher clutch bite point :)...

Hi all got my vito, but cant get any ignition lights on, have took of steering lock and can get that to work so key turns fully, by sending a direct feed to the lock but still no lights on dash:crazy: checked all fuses, in main box and by battery are there more anywhere??? battery good had...

1991 H reg 230e automatic. Can someone advise what's the best setting for the ignition timing with regard to obtaining optimum fuel economy? Also, what should the emissions be? Mine were 0.67% at the MOT a few weeks ago which I thought was a little bit lean. Finally, do these engines...

hi my car has a big problem the ignition is stucked and would not turn anymore does anyone have a solution to the problem? i have tryed with the spare keys but still stucked had to get towed home

I rarely use my 2002 S320 Diesel but keep it on a trickle charger. I started it this morning for the first time in 8 weeks, started first time and I left it running for a few minutes. Switched off and left it for a few minutes, and tried to start again. Dash board lights up but silence from the...

My second key stopped working and it was flashing on the key which means the batteries required replacement. These i have now changed but the key is still not working? and still flashes? any ideas? or has someone had this problem in the past? thanks in advance.

ive an sl500 that still wont start is there any one out there who can shed some light on this illusive relay? also does anyone know where the live "start" wire heads to after the ignition switch ive read alot about it heading to this k38 relay but i cant find it anywhere, im not even sure it...

Hi there folks, Looking for a bit of help from all you guys in the know with a problem ive been having with my Ignition Barrel on my 2009 ml 280 cdi. Recently when ive been putting the key into the ignition I don't hear the noise of the steering lock unlocking and I know now that it isn't...

Only noticed this recently and only on German cars, but the hazard lights flash at a different intervals depending on whether the ignition is off or on. They illuminate and flash for a shorter time when the ignition is off. Easiest way to notice it is putting the hazards on just before you...

All for a W124 300-24v engine and are all brand new never been fitted. Bremi Distributor cap £46 Bosch Rotor Arm £28 Full set of ignition leads £45 Price includes postage

Hi all, need to get some new leads for my W208 clk 320 does anyone know what the complete sets are like from euro car parts for £83 or closer to £63 with a discount. Thanks

Is it possible/viable to replace the original ignition system with a modern 'breaker-less' one on my 300-24v? I have read a few posts on here over the years about it being a weak area on the cars (124) generally, with it being recommended to replace the distributor cap etc on a more than normal...

Hi everyone, is it possible to obtain a new ignition key ( old style , two button ) for my 1998 slk 230, other than paying the £210.00 my mb dealer wants , i have seen blanks on e.bay, but have been advised that no one can cut them, any ideas ?, thanks, Brian.

As the title states. Looking for a late model w126 ('88 - '91) 560 ignition module / EZL / control box. Part number 006 545 5432. Its the one with 8 pins per socket and runs knock sensors. Need a tested used unit. Thanks

Hello My C230 W202 Year 2000 model has developed a fault where the electronic key stopped turning in the ignition. We have removed the ignition unit where the key goes in and there is a little plastic flap that can be seen inside this is meant to move up and down presumably by the electric...

Hi All, Every morning as I turn the key, prior to turning the engine, there's a great big gurgling from what seems like under the dash, very loud it is, too. Despite having had many an old merc, I've never come across this before. Possibly related is a very high tick-over of 1900. Any...

I managed to damage one of the ignition leads (ht leads) on my w124 300e 24v. Would someone be able to advise me on whether the 24 valve m104 engine requires different leads to the 12v engines? Some cheap sets on ebay suggest they fit both types whereas eurocarparts and gsf suggest the m104...

Hello, So the other day I unlocked my doors by remote smart key as per usual, and I inserted the key into the ignition and I noticed that I didn't hear the usual zipping sound. I tried to turn the key and it would not move. Tried the spare key and still no go. Shortly afterwards I noticed that...

Hi everybody, I'm having some trouble removing the ignition lock barrel on my 190E. The current one is on the way out - the key has to be jiggled around to get the lock to turn, and I've read that this can quickly lead to the lock getting jammed or the key stuck. Therefore I've bought a new...