injector

Hi, I have an R reg 312 Sprinter with the 5 cyl 2.9 turbo engine, and I have a blowing injector, number 4 to be precise and this has been chugging away for at least 12 months. I have already bought the sealing washers, new bolts and grease and today I decided to bite the bullet and remove...

I am about to attempt and renew my injector seal on one of my injectors. Now I know I need a new bolt, seal, special grease and the tool for cleaning the seat which I assume I can get from the dealers. Can one of the many experts on here tell me what else I may need and any problems I may...

Hi all, I have a W210 with a leak from the outlet seals on top of the injection pump! Has anyone changed these seals themselves? If so what is involved? and do you need any specail tools? Thanks. Terry

I rang a local diesel mechanic the other day to get a quote to refurb the injectors in my C250. He returned at least £700 + vat. I told him i didnt want the gold plated ones just the standard would be fine, to which we both laughed. Is it just me or does this seem completely over the top? Maybe...

My injector seal is starting to leak again. Now I have 1000 mile round trip to make for a week. 400 miles there and 400 miles back a week later. Is this advisable and what is the worst that I can expect. Many thanks in advance:wallbash:

Hi, Does anybody recommed a fuel injector cleaner for W126 420 SE? Best Rgds

Hi guys. My E320 cdi (54) 106k has been starting to idle and a kinda rich fume smell. I am now suspecting an injector or airmass if anyone could please help me confirm. I have noticed some light blue smoke on starting and now idling pretty bad but car seems to be running ok and not underpowered...

The belt tensioner pulley on my recently purchased 1990 300td is out of alignment with the other pulleys. It sits further back towards the engine than it should, so the belt is off the front edge, and is wearing out the newly fitted belt. Any tips would be much appreciated! Also, the engine is...

Good evening, I am currently running a 1995 206,000mile w202 c250 which in it self still drives well but when she's up to tempreature she has a clatter. I know the five cylinder diesel is not the most 'harmonous' engine on tick over but there is an intermittant clatter which sounds almost...

Today I started to tackle a couple of leaky injector seals on my W210.I have new seals/stretch bolts,injector grease and a tap from Hudson precision to clean up the threads. I soaked overnight in coke and took it for a run to heat the engine and have spent the past couple of hours wiggling the...

Hi all, I hope everyone is well. Just to confirm, are the only real indicators that an injector has failed when you can smell fuel in the cabin and there is fuel around the injector? Regards dokalj

hi new member just done an injector seal on my 110 cdi vito not a very nice job but at least it saved me a big bill It runs a treat now. well thats about all Ive got to say for now It,s taker me ages to write this tread still learning to use a keyboard...

Hi all, I'm looking for a little advice here, as a second seal has started to leak/let by. I had the front one done by a local diesel specialist at a cost of £320 and although it fixed the problem (for now) I was kind of expecting them to clean the carbon residue off the entire area, but they...

Hello All, Well to start with I had a fuel leak, and although the washer and oring on the fuel pump pipes are shown as a separate part MB informed me that they come with the pipes only. Bought 2 new pipes and fitted them, guess what, the pump started leaking. Fitted a new pump and all seemed...

I've noticed some coal around number 2 injector and although not making any noise yet I'd like to sort it out before it gets worse. I've bought 6 new injector stretch bolts and copper sealing washers,mercedes injector grease and an injector puller set(laser tool no4762) I've also bought a...

Been looking around the forum for tips and techniques on replacing my #3 injector seal, was just about to do it myself then bottled it! I'll replace the other 4 washers myself but thought it best to let a pro sort out the leaky one with all the black death around it... I called Jay (Jaymanek)...

Carried out a leak off test today on my 2002 Vito 108cdi The third one filled upto half way just by cranking the engine, so the i think the third one is knackered.. I have rang two garages and first one has quoted 360 to fit a new one, the second has quoted 307 to fit a recon one Are these...

I posted this in the electronic section and I'm not sure If I can post this also in this section, If I'm wrong please correct me. The other day when I started the engine with the bonnet open I noted a strange noise coming from the left hand side of the engine, I called my local MB mechanic...

Guys i am after a Injector for my C220cdi 2004, any suggestions?

As I have posted recently about cleaning the EGR I was just wondering about anyones knowledge or experience of an additive called BG44? Does it help clean all the crap our or is it just bolleaux? I had doen a bit of surfing and came up with this interesting article Homebrew Sea Foam...