joint

I have a 1993 mercedes 300ce sportline auto....I need a propshaft flex joint front position.....I can get the part online but need the part number, how can I get the Number without taking it off the car?

hi any owners in scotland especially west coast ayrshire in need of ball joint press for w220 ( may be adaptable for other models ) I have one to sell or even rent with deposit . I have just replaced mine with no issues with this toll and saved over £300 in labour charges from the stealer picked...

Hi guys Strugling to separate the lower ball joint from the lower arm on my w211 Tried everything looks like seized very badly broke one ball joint separator today Sprayed wd40 and left it for a night hope will work it tomorrow If not is it ok to heat it up and try to separate it? Thanks

can I still drive (very carefully that is) a short distance if I remove the damaged drive shaft. The vito will not loose gear oil

I've been looking on ebay and there's full drive shafts for around 35 pound this is for my 2001 vito does this sound right and if anyone has bought off eBay are they ok

Car - W126 500 SEL Well, just spent the whole of Easter Sunday trying to fit a new nearside lower ball joint to my car. :confused:. (Think my time would have been better spent down the pub having a pint!) I am totally stumped. First issue is the ABS sensor. Despite undoing the...

I seem to be having a rough time with my W211 E320 CDI Sport 2007, 78000 mile car. A knocking has started from the osf going over small bumps and when locking the wheels. Grabbing the front wheel and a pull/push movement on the top of the tyre with the tyre on the ground I feel movement and I...

Hi all, I drive W203 C200k wagon 2001 made, and recently failed the MOT test (@Halfords) on the below basis "Offside lower (outer arm) Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)" My question is, do I need to replace...

Hi guys I've just had to do the lower ball joints on my E (W210) which was a wee bit annoying as I'd just had it up to do the brake pipes... should have looked at them at the time....:mad: Anyway, here's a quick guide that shows you how to replace or repair them (yup, repair is sometimes...

There is this weird ball joint/radius arm end joint type thing, I don't even know what to call it, on the C126 front suspension. Its used to adjust caster. You can see it on this screenshot attached, marked as 48. They just call it a 'support joint', which is not much help. Does anybody know...

Maybe just any merc cv joint really....Took the passenger hub to fit a new bearing...while doing so the hub-end cv shaft extracted itself from the inner drive shaft (too easily imo)....put everything back together only to find that a small tug on the shaft (careful now !!) caused the cv joint to...

I have a very loud squeeking now on the 124 there was a bit of a squeek then it went now its back with a vengeance I'd be worried even driving it to a garage I thought it was a balljoint but they have both been done and the one now groaning was done 3yrs / 25-30K ago so at first squeek...

I wonder if anyone knows if a cv joint from a vito 108 will fit my v-class automatic. People here seem to be having a problem like no listings for v-class. Thanks

Please forgive me if this is old hat to you all but there is a great money saving thread on the other site's forums about refurbing the ball joints. There is a current post so its easy to find

Hi, I'm a newbie looking for some advice. I had my 2006 reg C180 estate serviced yesterday and was told that the offside front camber arm ball joint is needing replaced as the bush is sticking straight up and I believe it's quite urgent. It seems quite a costly job at over £300 and I...

Does anyone here have experience of entering into a joint venture with a builder on a house rebuild / refurb?

Hi, i need to replace a bottom ball joint on my 1998 C200. Any advice / tips would be great. Also do you need any special tools? Thanks

Ladies and gents! I have a diesel leak between the engine and the fuel pump. Its a the bottom of the pump where the square washer is. Any ideas? Thanks

Hello I have a problem with my ball joint After having a new one fitted a week later I was under the car and noticed the clip that keeps it sealed had came away from the ball joint it was sitting at the top and the ball joint was open to water, had a new one fitted at Mercedes it did the...

Hello and thank you for taking the time to read. I'm replacing the complete left side of my car's suspension as some nutter did a hit an run collapsing bending the left strut and hub arm the one that bolts to the upper arm’s ball joint. :mad: Anyway I got the complete left side from...