manifold

  1. B

    Oil Intake Hoses, EGR & Manifold.

    Hi, I had a leak on the feed pipe to the EGR, it required a new gasket. Whilst repairing this issue I noticed, oil in the intake pipe (after what I believe is the PCV); also in the pipe going into the intake manifold and inside the EGR. At there was enough oil, so that when the EGR was...
  2. M

    ML270 Manifold Swirl Flap Removal Needed Doing West Yorkshire

    Hi guys & gals I've just purchased a W163 ML270 and have a few jobs I need doing. I've already gutted both cats as they were blocked and rattling. I'm now wanting my swirl flaps removing and an egr shunt. Can anyone recommend a garage around bradford, Halifax or Keighley? Or even a member on...
  3. andavaka

    CGI turbo manifold into M111

    Hi Guys, Does anyone know if the turbo manifold from a W204 C200 CGI will fit my W203 C180 n/a M111 head. I believe the CGI is a M271 engine.
  4. M

    Tips needed as to what to look out for on ML270 inlet manifold again (Sorry)

    Hi Guy's, For various reason I have decided against the car I was seriously looking at, and am looking elsewhere. The car I was looking at did give some peace of mind in that it had had its inlet manifold changed recently so I wasn't really worried about it. Now I have decided against that one...
  5. I

    A Class Inlet manifold rubber gasket?

    Hi all! My car is a 2001 A Class A190 Semi Auto Petrol. Where is the best place to get the correct inlet manifold rubber gasket as well as injector sealing 'O' rings? Thanks!
  6. W

    How To remove inlet manifold on a M104.980

    I have oil in my coolant, the head gasket was recently replace just prior to my purchase of the car. I am under the impression it good be the oil cooler. I am in the process of trying to remove the inlet manifold so as to access the oil cooler. I have removed the wiring loom and all the...
  7. Ermir

    Inlet manifold

    Hi guys, When i recently cleaned my egr on w203, i noticed that the inlet manifold was also very very dirty inside. It looked like it was filled with hot bitumen. Does it worth to take it out and clean or just leave it as it is, as the car is running perfect? thanks
  8. L

    W211 (2007 -on) 220 CDI inlet manifold clean out

    If you’re doing an inlet manifold clean on a manual, facelift W211 (2007 – on) with the OM646 220 CDI, the following is worthy of mention. The Haynes C-Class 220 manual doesn’t cover everything – but read it for the basics Pre-facelift (pre-OM646) engines use a different manifold Things you’ll...
  9. jay1983

    270cdi manifold finally

    Finally nearly got it off! All bolts are off and now it's just a case of manoeuvring it out! I'm going to need to clean around the ports on the head tho as they are covered in oil. I'm going to blank the manifold before I put it back in. What is the best stuff to use to clean the head and egr...
  10. W

    W211 E55 AMG exhaust manifold cracked

    Help please - although a long time lurker this is my first post. My driver side exhaust manifold has cracked, can anyone tell me where I might find a used one for sale? (2005 E55 Kompressor AMG) Thanks in advance Mark
  11. W

    W211 E55 AMG exhaust manifold cracked

    Help please - although a long time lurker this is my first post. My driver side exhaust manifold has cracked, can anyone tell me where I might find a used one for sale? (2005 E55 Kompressor AMG) Thanks in advance Mark
  12. S

    Clk 270 wont start after new inlet manifold fitted

    Hi I've fitted new inlet manifold and had the diesel rail off , it's all back together now but won't start , any ideas ?
  13. J

    manifold flaps problem

    Hi Recenly bought a 52 plate 270ML CDi it has a problem of running rough on tickover and when booted going into limp mode. When switched off and re started it runs fine for a few minutes. I am informed this is most likely caused by a series of flaps on the manifold and they can be removed...
  14. O

    Inlet Manifold

    Just been told my manifold's need replacing on my E280 V6 Anybody else have this done and at what cost??
  15. Y

    W203: Help, leaking turbo and leaking inlet manifold!

    Hello everyone Yesterday I took my W203 2001 C200 CDI to service because of diesel smell in the cabin and the leak was in the pipelines. Anyways the mechanics had noticed while finding the leak that my turbo is leaking and that has also caused the inlet manifold to go bad! I didn't have too...
  16. E

    Intake manifold cleaning.

    Well, Yesterday I dismounted my manifold to open it and clean it up. Before starting I decided to check the procedure at the forum. I found helpful stuff, but what I didn't found was if I had to put again glue in top of the "ribs" that assemble with the upper part. My engine.. M112 or M113 is...
  17. I

    Seized Manifold

    I have 2002 E320 Auto Estate 150,000 miles. lost kickdown, runs smoothly and there is no problem when using tiptronic gear changing, so took to MB garage and have been advised I need new Inlet Port motor and manifold plus Hot Film Mass Sensor. Needless to say these items are very expensive...
  18. M

    W210-e320cdi - manifold gasket

    Hello, just had AA out to check knocking sound from engine......road tested but couldn't replicate sound to be honest...... It is there but weather noise was loud.....anyway he is convinced after checking under bonnet and hard acceleration we can see smoke / fumes / air escaping just beside the...
  19. J

    E300 inlet manifold wanted for project

    looking for an e300 manifold so i can cut it down and modify it for an om605 engine. cheers
  20. Harlowcabbie

    Manifold swirl flaps w210 e220 cdi facelift

    Having what I think may he an issue with the manifold swirl flaps. I have recently noticed that the car seems abit reluctant on acceleration so thought I'd check all the usual suspects and whilst checking the manifold flap operation I noticed the bar wasn't moving at all when I rev the engine ...
Back
Top Bottom