mounts

Anyone any idea where these parts can be sourced economically? thanks in advance

I have water ingress that is soaking the carpet around the 2 rear mounting points (where the seat bolts to the floor) of the right hand (drivers) seat of my '92 300TE-24. The mount areas are recessed, so I'm getting two nice little ponds forming. The left hand side is dry. The rest of the...

Just got some new lemforder mounts, anyone know what the two blue dots are for on the sides? For lining up maybe? Also I noticed that they'd etched the MB star of the side and but left the merc part# so I guess be the same ones you get from the dealer.

Looking at the ECP website, there are two options for the W211 E270 Diesel engine mounts. A Lemforder one and a Q-Drive, any comments on either of these. i am new the the Benz world and just wondered about the quality of these two items and wondered why the difference in the prices. Thanks in...

Hi all, I just removed the engine mounts from my CL, pics attached. The mounts are not leaking and are still of equal height. However there is quite alot of cracking in the top mounting area around the rubber neck. Can anyone help with a definitive answer as to whether they are shot or not? I...

Hi All I found a front bumper for my w230 350sl I was more concerned with the superb condition it was in and did not realize it was an SL55 bumper An expensive lesson!! Anyway I have now got the three grills and fog lights and I now want to know what parts I need to mount the fog lights as no...

I need to change both rear engine mounts on my W168 (A160). Is it just a matter of supporting the engine and then removing the relevant bolts? Are the mounts easily extracted from the subframe after undoing all the bolts? Thanks

Hi all, I own a 1993 W124 300TD. Does anyone have a link to some responsible priced engine mounts. Also are left and rights the same? Do all W124 have the same mounts (petrol/diesel) mine is a diesel. I'm guessing to change them out I need to undo the nuts/bolts on monts and the lift...

Anyone post a diagram and mercedes parts numbers for the above?

Is this Mounts or Torque Converter? I Have a Vibration in reverse, In drive it's fine, but neutral is getting quite loud, also when turning right I get a vibration while turning, should I replace mounts?

Hi Guys. Ive seen many threads that mention the roll bar upgrade. I have an eibach roll bar that i got really cheap. Its 27.5mm all the way through. If i put the bar next to my original one, it seems slightly miss shaped, and when i go to mount it, i can get the mounting done on the wishbones...

Hi Adam, We cant Send PMs so i though i'd share my findings here :) 12518 01 = 337221025 LEMFORDER ENGINE MOUNTING 202 208 210 93-03 @ £48.60 (£36.45 after discount) 26076 01 = 337222065 LEMFORDER ENGINE MOUNTING MERC E-CLASS 210/S-CLASS 220 @ £81.60 (£61.20 after discount) They are...

Does anybody know if w211 eclass front top mounts come in different sizes/heights? I remember on the 210 there were different size pads that could be fitted to affect the ride height depending on wheel and suspension combination. I've fitted the lower avant garde springs and shocks to my car but...

Hi there, I need Engine Mounts for a 1988 W126 SEC M117 5.0, the Stealerships are charging Stealership Prices:mad:, Does anybody know where I can get a set from? I have Tried ECP.... TIA Oldskoolmercs :thumb:

Over on the american forums, they recommend upgrading to (w209) engine mounts when replacing existing w208 ones as they are 'stronger' and in addition to lasting longer they make the ride even smoother and severely reduce engine vibration (something to do with the fact the same mount is used in...

Ok so i heard you can get a one inch drop using r129 top mounts on a w124. Is this little gem correct amongst you knowlegable folks? im looking to overhaul my suspension set up... heres the options ive rounded it down and need your advice on what the best combination of springs shocks i...

Hi All I have a c220 cdi on a 55 plate and have been told that I need new engine mounts - there is a lot of vibration under acceleration and it is becoming really annoying. How much should I be looking at to have both mounts replaced as a ballpark figure? Also does anyone know of any...

Hi All Have an annoying clunk in the 320CE, and am at a bit of a loss as to what it could be. I have replaced both flex disks, the diff mounts front bushings in rear subframe, trans mount and both motor mounts. Basically upshifting, even under full throttle/redline is fine, no jerkiness...

Does anyone know where I can get the rubber rear subframe mounts for a W123 300D? The Mercedes dealership has drawn a blank saying 'no longer available', and the closest I can find on Ebay is this, it lists a 240D, but no 300D. http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT The Merc...

I had new engine mounts fitted yesterday. One of them was totally shot to bits! I'm amazed how much smoother the car is now! :thumb: