obd

http://cgi.ebay.co.uk/OBD2-ELM-327-USB-Scanner-Tool-CAN-Bus-OBD-OBD-II-V1-2a_W0QQitemZ150281971030QQcmdZViewItem?hash=item150281971030&_trkparms=72%3A636|39%3A1|66%3A2|65%3A12&_trksid=p3286.c0.m14.l1318 Do you think this would work on a 2002 W220? It says it should work on an MB but it's not...

One on e-bay called carsoft 7.4 all of £7.99:D Anyone tried this if not what do you use. Lynall

Hi I’ve a 1997 w210 E300 TD with a 606 engine. I know I have a 38 pin but do I have a OBD II connection on this vehicle?? If so, where is it ? If not what do I need to connect to carsoft 7.4? Thanks with anticipation

Does anyone have an OBD II socket and appropriate wiring available for a W210, preferably with as much wiring as possible to the 38 pin DTC connector.?

Hi, I am the (so far) happy owner of a 2001 CL600 which is a fabulous car but reading around it seems that it will only be a matter of time before something goes wrong with the electronics... Therefore I am considering purchasing an ODB multiplexer from Ebay...

anyone know if one of these will fit my e300TD to use with my diagnostics software?? http://cgi.ebay.co.uk/VAG-COM-USB-KKL-OBD-2-Cable-VAG-COM-interface-AUDI-VW_W0QQitemZ290197270950QQihZ019QQcategoryZ30921QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

THE OLD ORANGE LIGHT PROBLEM, ARMED MYSELF WITH A UIFTECH CAN OBD 2 (CHINESE I THINK),,BUT HEY £60 ISH, PLUGED INTO 2001 CLK 230 KOMP DLC (LOCATED NEAR HOOD RELEASE) (STOOD BACK AND STARTED HER UP) AUTO-LINK KICKED IN..AND RETURNED MY FAULT CODE (S) WITH A FULL DESCRIPTION..(TWAS A DODGY 02...

Can anyone explain in plain english about OBD II? I've been trying to get to grips with it for a couple of weeks and there is a huge amount of information about it on the internet, there are readers for £30 and machines up to €8000. There must be a huge difference between them yet they both use...

Now, my 1996 C200 is having a problem with a serious lack of power for the first mile or so when I'm starting from cold. I've seen loads of similar problems on the forum and most of them point to the MAF being the cause of the problem, though I would like some more pointers to the cause before I...

Has anyone tried one of these on a later 16 pin W202 ? http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=4628832133 Can anyone tell where the socket might be on my pre-facelift 1997 C-class,I assume it's the earlyier 38 pin type ? thanx adam

I have a CLK320 (2000 model) without a 16pin socket in the drivers footwell, so does anyone have a 38pin scanner which is any good?

Hi all. Could someone tell me the pinout of the OBD-II connector of my car? It's a W209 and the pins used are: 1,3,4,5,7,8,9,11,12,15,16 I know what pins 2,4,5,6,7,10,14,15 and 16 are. Pin 2 - J1850 Bus+ Pin 4 - Chassis Ground Pin 5 - Signal Ground Pin 6 - CAN High (J-2284) Pin 7...

from here 90 quid... reads all post 2001 cars... BUT!!!! all cars post 1996 in the states are obd 2 compliant - and you will note that my car is a 96/7 car - so if it was in the states, it would have the socket. So I looked up the wiring diagram for the socket on my favorite russian...

Anyone knows what information is available with ODB1. Is it usefull to end users to have an interface? Is it just some indications by voltage levels or is there a real communication to laptop (probably through a special cable)? More info is welcome, specially for my car: E-290TD, 1996...

Where can I find a OBDII scanner to plug into my cars electronics cheaply? I have a laptop and would prefer it use that instead of one with a built in screen.