Hi all, hope your well.
i have another thread that's still open that some of you have probberly viewed & have or replied / sent help. its w211 e320 no start.
i have started this thread or this to ask.---
the high pressure diesel pump on the front of the engine, is it a straight forward...
My pressure sensor has gone kaput. The one fitted to the car has part number A006 153 95 28, after a search i'm only finding used ones. However i'm finding lots of A642 905 01 00.
Has the later part replaced the first??? some listing i've seen show both numbers together but these are in...
hi
my wastegate actuator is not moving, think it has nothing to do with the actuator because if i push it and cover the hole with a finger it holds the arm in. can the pressure converter be damaged ?
i´ve seen on a bmw forum that they connect the actuator hose to the EGR pressure...
Was pressure washing my car today with doors closed technique
http://youtu.be/8cTHmMVnZjs
But maybe I should have tried with doors open technique!
http://youtu.be/LUgvSdsGy80
I could do with a little information just now. My engine is a M103 . And the fuel pressure regulator might need replacing .I have had a problem with the car from day one 3 years ago . Starting it is not clean .But it will start every time .But when it is warm , it starts and stops. I have...
Hello, I'm the owner of an E200, 2000, 85kw Mercedes Benz. I clean the egr past days and after I set up all the parts again I noticed that the engine have other sound and it doesn't sounds like it use to be. Today I noticed that the part 0005450427 that I identify as Vacuum pressure converter is...
I would like to test whether my fuel pump works or not. I took off the delivery pipe from the pump and I cranked the engine, many times, while I had my finger on the delivery side. The pump was delivering fuel but there was hardly any pressure. Is this right?
Guys
We can't get the pressure sphere undone (seriously tight). Heat will be a no no due the risk of melting other bits. Has anybody found a way of loosening these?
This maybe a silly question, as I've recently purchase an Eclass with starguard. However now that i will be washing the car, can i use the after care products like rain neutralising shampoo with high pressure washers, or should i stick to a bucket and sponge?
Answers & advice please as i'm a...
Hi Folks
After a spirited drive today (1990 300ce) I could hear 'gas' escaping from the fuel cap, when I opened the fuel cap there was quite a pressure release.Is this a common occurrence ?
Hi,
Im still trying to fix my w210 e230cdi. Thanks to all of the advice im armed with the correct tools and have some codes and some way forward. The car now wont start which is good as previously ive bee trying to trace a fault thats not apparent.
Can anybody tell me the minimum fuel...
Got pump off yesterday and stripped it out. Took longest to clean up all surfaces than to fit the repair kit.
Only real problem I encountered was fact that she would not start and i had to fully charge my battery twice.
First thing this morning still no joy. Who said these cars self bleed...
I have fuel leaking from one of the three ports on my High Pressure Fuel Pump.
I have decided to overhaul the pump using the MB seal kit.
However there appears to be two different numbers banded about on the forums?
Part Number: A 000 078 06 80 to be used on pumps produced up to 17/7/2001...
I tried out a different set of wheels on my car the other day but then decided I'd put the originals back on but after numerous attempts to reset the system the orange warning light remains on all the tyres are set at the correct pressure and the monitor confirms this, any ideas anyone ?
Hi
I have a cls 55 amg and am looking to replace the tyre pressure sensor valves.
Has anyone ever replaced these before and is there anywhere else that sells them other than mercedes?
Any help is appreciated, Thanks
Imy
Hi all,
Just wanted to do a quick fact finding poll especially with M111 engine owners regarding your fuel rail setup, specifically the fuel pressure regulators.
I own a 1995 W202 C180 Elegance with the M111.920 engine, with MPS (Manifold Pressure System is what that is I believe) and no MAF...
Steelmate | TP-8886 DIY Tyre Pressure Monitoring System For Android
As above bought two weeks old ago as a present for my father. However, he doesn't like the android thing so have brought him the simpler version.
It comes boxed with all the parts included and was only put on his car...
Hi guys.
I have some winter tyres to fit to my 2011 CLS 218. It has some kind of tyre pressure sensor system - is there anything in the wheel/valve I need to keep? Or does the system just work using the ABS/rolling radius?
Also, is there anywhere in the system menus that tells me how long...
My tyre valve broke of my car on Sunday so got it replaced. Before I gave it to the mechanic to replace it was showing all the tyre pressure levels for all for tyres, really low for the one where the valve had broken because air had come out when trying to fill pressure (it was dark).
Anyway...