removal

Hi Does anyone know if these trim inserts come out easily, or does the bumper have to be removed? Ray:dk:

Hi guys, looking for a few words of advice on removing a rear brake disc on my S210. I got the pads and calliper off no trouble at all. But the disc was stuck. I knocked with a hammer at the side where the calliper fits, but it didn't move at all. Is it possible that the parking brake...

Good evening all Some advice please. Ive an S55 AMG, which has a series of small dings across the front doors. I understand that PDR could do the trick here, however ive been refused by 2 companies so far today who said that they cant do it because the windows are double glazed. Can anyone shed...

Hi all, my serpitine belt tensioner is playing up. Its the one with the dampner on (not the normal type) I cannot remove the lower bolt of the tensioner without removing the crank pulley Will the crank pulley have to come off ?? It looks like a bloody big bolt !! Cheers :fail

Hi, Just wondered if it is a easy job to remove the rear bumper on my SLk, I don't have to fully remove just need to create a gap between bumper and offside rear quarter to do a bit of touch upon the paint and as its right on the join I want to put some protection in between as a preventive...

Hi There, I need to remove the door card of my 1994 E320 coupe to get at the window motor. I had the door card taken off my old 300ce at the garage but it seemed to break 2 clips located near the bottom so the door card never sat properly again. Can anyone please tell me how to take it off...

Can anyone point me at or provide details of how to remove the rear external door handles on a 2007 CLS (W219)? Thanks in advance - Paul

Can anyone send me a link or video or stepped instructions?? I just cannot find any & I've started to remove mine & it's becoming quite tedious; in other words, I'm stuck!!

Hi folks, just need help on removing the instrument cluster, I've no idea on how to do it. Need to to unplug it to check if that causes a power drain overnight. Thanks in advance.

hi i have started the task of removing rust from the arches of my 202 (facelift) i have read the how too post on wing removal and removed the wing from the car. i now need to remove the the plastic trim with the sport badge ... i can see the three plastic lugs inside is it just a case of...

W210 220CDI Inlet manifold removal sequence My apologies if this has been posted before, I could not find it and wanted to give something back to a forum (1 of 2) that has helped me greatly over the last 6 years of Merc ownership. The CPS went faulty on my E220 CDI and I was unable to...

Hi guys I have bought upgraded number plate units but I can not for the life of me see how to remove the old units, I have unplugged them and know you have to squeeze the tabs to remove unit but the access hole in the boot lid seems too small? Can anyone help? I have taken some pics to help

Hi all, Just about to take the egr, cooler and manifold off my 2002 E320 cdi with 146k. Ive got a spare manifold from a breakers which im cleaning up now so I get swap over quickly. Question is - I see the manifold has a coolant port and coolant pipes. None of the threads ive looked at have...

So I decided to replace the radiator on my lovely CLS500 - merely as a precaution. Its nearly 10 years old and means the auto cooler will also be new. I've been in the heat exchange game for well over 30 years and cut my teeth fitting and repairing rads so no bother I thought. Obviously I know...

Please can anyone tell me how to remove the drivers seat back on a 2003 C32 as i need to replace the head restraint motor ?

First job I come to do on my, new to me, R107 and I fail! I have a 1986 300SL (R107), I can't understand how I can undo the lower bolt on the dissy cap. The top two have good access, no problem. The lower fixing can't be reached with a normal size Allen key socket, but an extension means your...

First job I come to do on my, new to me, R107 and I fail! I have a 1986 300SL (R107), I can't understand how I can undo the lower bolt on the dissy cap. The top two have good access, no problem. The lower fixing can't be reached with a normal size Allen key socket, but an extension means your...

I have a slight rattle in my door panel upon startup ....i can slam the door and it stops or i can wind the window down a bit and then up and it stops. Any one know if left alone will it get no worse or will the window bits etc. come undone and fall to pieces? In other words what does...

When I got my car delivered new about 5 months ago, I went to get my windows tinted at the rear from a 3rd party. Didn't notice at the time but maybe a couple of weeks later saw a couple of stains on the driver's seat. I am guessing must have been some sort of glue that was used to apply the...