• The Forums are now open to new registrations, adverts are also being de-tuned.

removal

  1. mattyv33

    W220 S500 Harmonic Balancer Removal

    Hi all, Trying to find a way of locking the harmonic balancer pulley so I can undo the 27mm bolt - I have spent days researching the subject, bought all relevant parts like genuine merc harmonic balancer and bolt, torque wrench to tighten to 200nm and 27mm impact socket. I have two lengths...
  2. T

    S320 CDI Injector Removal

    Hi I have two leaking injectors. I have stripped down to the point of needing a removal tool and was wondering if anyone has a removal tool to hire or can recommend the correct model number of the tool to purchase please? The tool i have been told will fit is a Sealey VS2056 but not sure if it...
  3. F

    E Class Coupe C207 backseat removal.

    Got urgent issue need to get to the trunk as I have keys closed down there. Had to brake window but trunk button is not working. Could someone tell me how to remove backseat :(
  4. PSD379

    2013 C63 Coupe Parcel shelf removal

    Hi All, Does anyone have any instructions on how to remove the parcel shelf from a 2013 C63 Coupe? Any help appreciated. Thanks PSD379
  5. J

    W203 interior trim removal

    How do you remove the interior trim that runs between the windscreen and the drivers door? I need to run a couple of cables behind it and along to above the rear view mirror.
  6. P

    W211 E-class headlight removal.

    I wonder whether anyone has any advice on removing the headlights from a 2004 W211 E220 ? I had a look through the internet, and all I see is the removal of the front bumper, before you can remove the headlights. Is there any easier, less time consuming method, that is doesn't involve so much...
  7. P

    W140 coupe front wing removal

    Hi all, as the title suggests how do i get the front wings off? I have a mint pair from the usa but need to get the old ones off, and specifically the lower plastic panel. Thanks in advance for any help Phil
  8. BIG_G_1979

    w212 drl (hockey stick type) removal

    Hi guys need advice on how to remove the drl from from bumper, my dad's driver side one seems to have been pushed in so I need to remove it to see what's going on, does the black moulding remove from the front of car or do I need to go underneath and remove from rear inside the bumper? Any tips...
  9. C

    aerial cable removal

    Hi doe's anyone know how difficult it is to replace the antenna cable from radio to aerial on a sl500 r129, IE can it be taped to the old cable and pulled through or is it carpet and panel removal. many thanks ,any help would be appreciated . Colind 55
  10. A

    Removal of central console

    Has anyone removed the center console from the A Class w176 Only the car has a carbon effect dash and would like to do the console, found a vinyl carbon effect that's quite a good match. Cheers for any help and advice in advance :thumb:
  11. C

    Engine Cover Removal W212 E350 CDi

    Hi, Bit a of a daft question but does anyone know how to remove the engine cover on a W212 E350 cdi please. Looking to do a DIY oil change at the weekend and need to get to the oil filter. Assuming it just pops off but not sure how to disconnect from air intakes at the front. Anyone know...
  12. A

    Baffle removal and power

    Hi I have a turbo car and would like a bit more grunting sound from the exoust, the A250 pipes looks like they have three baffles, if I was to remove the baffle from the box before the exoust splits into the two exit pipes, would I loose any power. Asperated engines need a bit of back presure...
  13. Trucknightmares

    Vito (W639) tailgate trim removal

    Looking to install a reversing camera in place of one of the number plate lights but can't see how the interior trim of the rear tailgate comes off so I can route the wiring. Found the 2 screws that secure the grab handles but not sure if I'll break clips if i just try tugging the trim off...
  14. F

    CLK 500 w209 pre-facelift grill star removal?

    Anyone know how it comes out? Some twist out anti-clockwise but this doesn't it would seem, the whole middle moves like it sort of could, but I can't find a way to remove anything without screwdriver time.
  15. L

    w123/w126 grille star removal

    OK, so I have this W126 but what a friend referred to as the "gunsight" (the star from the top of the grille) is broken. I have a sound one on the W123 which is going to be scrapped, but I'm damned if I see how to remove it. Searching on google only seems to find how to remove the newer type...
  16. tron

    250TD fan and water pump removal.

    As far as I was concerned this morning, tracing the water loss to the pump was good news. Obviously I would have preferred it to be a dodgy O ring on the coolant tank cap but as it wasn't the head gasket, I was fairly happy. Reality check. They put it together with Torx headed bolts. Order...
  17. F

    V-reg w220 S500 Phone removal,any issues?

    Hi, again...I am considering removing the Nokia phone fitted in the upper tray of the centre console in my w220, V-reg, s500...are there any issues realted to removing the phone, like Comand unit/steering wheel control faults, etc.? I really don't need the phone in there and it would be nice to...
  18. L

    W212 Rear door speaker grill removal

    Hi All, I was just wondering if someone could tell me how to remove the rear door speaker grills. I had a quick poke at it but I'm not sure if they are secured from behind the door card or not. Also does any body know the part number for the rear passenger door speaker grill in black ...
  19. M

    W124 coupe removal of trim help

    Hi All I am looking for help in removing the rear 'c' interior panels in a C124. That the trim which covers the side of the roof at the back. I need to remove then to re glue the leading edge which goes against the inside of the rear window. I am not quite sure how they detach and I don't...
  20. brucemillar

    124 Estate pressure sphere removal

    Guys We can't get the pressure sphere undone (seriously tight). Heat will be a no no due the risk of melting other bits. Has anybody found a way of loosening these?
Back
Top Bottom