sbc

Service brake visit workshop message .how to remove this. I have star days xentry

This is for anyone who is thinking of changing their brake disks/pads on a car with SBC I was recently doing a search on here on how to change and bleed my brakes on a cls55 but everyone was saying you would need a star system to do it properly. I managed to find some tools that done the...

Would anyone know if the following e class has the dreaded SBC pump assisted breaking? Identification no. WDB2110222A909737 0 Thanks.

Hi guys. Just recently my cls55 amg's SBC starting giving trouble. I searched on here for similar issues but couldn't find an answer. Getting the red warning on the dash. I purchased a second hand Mercedes star c3 and pulled the codes which are: C23CE unit A7/3 internal fault ( traction system...

Hi. A lot of topics on this matter, but none that could give me a definitive answer. Basically I picked up an E55k yesterday, and whenever I would like to use the SBC Hold feature, it comes with the SBC Hold unavailable. From what I found, it may be a switch at the gear lever, that is...

Hi, I have been getting a reduced braking...start engine message when I unlock the car in the morning.Took it to my local merc indie who put it on a star diagnostic and found no codes stored and said that the sbc was fine. My question is if it is battery related then surely would I not have...

I'll start us off with 181k on a 2004 E270cdt Estate.

I'm having some work done by an M-B dealership and in the usual way they've carried out a 'visual health check'. The technician has commented: 'Copper pipes fitted to sbc'. The pipes were fitted last year year by a superb indie and as far as I know there's no reason why they shouldn't be...

My w211 is stuck in Park with 3 malfunctions showing on the display, "Visit workshop, service brake", "ESP defective" and "ABS defective" I can unlock the shifter using the over ride switch and then the car drives fine and the brakes work without any problem. I've changed the brake switch...

Mine hasn't packed up, yet, but I was wondering.......do you need a dealer or Indi with special tools to change the SBC pump? I ask because I have AA parts and labour cover but my local Indi won't do warranty work, so I wondering if any competent repair garage can do it.

Mine hasn't packed up, yet, but I was wondering.......do you need a dealer or Indi with special tools to change the SBC pump? I ask because I have AA parts and labour cover but my local Indi won't do warranty work, so I wondering if any competent repair garage can do it.

Anyone in Essex/Suffolk could reset the SBC counter on my E320 or has a Star with Developer mode?Not expecting it done for free tho.

Hi folks, My garage have just called to say that they cannot clear the brake warning light because the SBC unit has reached its capacity and needs replacing - cost £1000 plus labour. Out of the question for me right now, but can I drive the car with this error light on? Is it safe...

Hi I have 2003 w211 with 128k mls. How do I check when to do a SBC reset. As I understand when you get a red warning light its too late. Also can you do a reset at anytime without causing SBC problems:dk:

Recently changed rear brake pipes and pressure bled the system. Think I may have air in the system as I'm noticing the SBC unit buzzing lot more. If someone could start their car and tell me how many brake presses they get between the SBC repressurising whilst stationary that would be...

Hello people. I own w211 E270 cdi 2003. Does anybody know if there is any method to swap SBC unit with face lifted over 2006 w211 standard unit??? Or with old one (W10 brake unit )?????

Hope you guys can help, I need to change the Front brake disc's and pads on my 2002 e55k, Obviously it has SBC brakes. With the car asleep, can i disconnect the Multi plug on the SBC pump whilst i work on the front brakes, then plug it back in before waking the car up? I know i can...

afternoon all. been out today and whilst in stop/start traffic SBC_S came up in the display. the car drove like the brakes were on. pulled over and flicked through the menu buttons and eventually SBC S OFF came up. put car in park, switched off and restarted. car drove fine. any ideas what...

I know this is something that has been talked about a lot on various forums, but I'd just like to pick your collective brains on whether you think doing this DIY is effective enough to make it worthwhile. This is one of the jobs I need to do on my 'new' W211 and I usually do all work myself...

On my quest for a e55, ive come a cross a few cars that have had the Sbc counter reset. This worries me abit tbh, Do you think it's a good idea or not,and if the counter has been reset do you still get the white warnings before the RED warning and No brakes (very little) brakes.