seal

Has anyone had any experience buying the horizontal seal between the outside of the front door window glass and trim of the door? (the one which if it was raining the rain would run down the window glass and onto the seal). Went to buy a pair from MB today but the picture on EPC isn't clear...

Has anyone ever changed 1 of these? Can I do I place or is it complete frame down? Thank you all

This weekend on the 220TE the new Cat is being removed and tweaked to relieve a foul on one of the Steering Column Bolts Before re attaching it to the manifold ( two bolts into a welded threaded nut on the manifold ) I was wondering whether there should be any kind of sealing ring between the...

Hi my drivers door weather seal as rotted/cracked and id like to replace it, is there a how too on here or has anyone done this. its the rubber seal that goes all around the outside of the doors. Also does anyone know how much these are? Any help advise much apreciated.:thumb:

Hi, Guys. I'm looking for the boot lock seal part no. as the Russian site is playing up at the moment. Cheers in advance.

Help Does any one have a walk through to remove the drivers side rubber door seal. Thank you in advance GT

Hi All, My S320 being new to me and having had a limp mode due to a faulty DPF sensor I want to start becoming preventative on issues. There is a lot of talk about the orange seal for the turbo. I had a look at mine and it looks like I have a few drops of oil below it. It seems a simple...

Hi all, I think the title says it all really. How do I remove the rubber trim/ seal (where the glass slots in with windows up ) in order to tackle rust bubbling up on top of door frame. Concious I could just yank it out but undoubtedly risk damaging it. Any insights much appreciated. Thank you

Hi All, I am new to this forum and hope to get some help on my GL class. I got some leakage on my GL third row window. By the look of it, I believe it was caused by broken seal. There are two different seals I can see. One is the external rubber parts which mount the glass and a plastic...

How difficult/easy is it to fit a new door rubber/seal to a clk 2005, I have wind noise on the drivers door and wondered if this would cure it. It looks easy on Wheeler Dealers but I don't think it's as easy as that. Many Thanks

Hi. newbie here so go easy pls... I have a water leak in to a passenger footwell via plastic/rubber seal below windscreen....im sure that it was wrongly fitted when windscreen was replaced.... its plastic on top with two rubber seals which should be fitted in to a channels below...

On my C-Class (W204) I have just noticed I'm missing part of the rubber seal between the underside of the bonnet and the top of the offside headlight as shown in the pic below like this: The other side is fine, like this: Not sure how important this part is but I should really replace...

I can anyone help i have a c class w203 2.2 diesel which i changed the injector seal and put it all back together and it wont start any ideas pls

This is the part that fits down both A pillars and across the top of the windscreen, where the roof meets the screen. Item 6 in the photo attached It has the drainage tubes in either side and it is these blocked/ripped/aged tubes that are often the cause of leaks from the roof into the car...

Good afternoon all, Hope you are well. My new CLK every now and again (twice in one month) had to be cranked a fair bit to get started. Once was the day after I bought it (I got scared), and once was this morning. It does seem like a rarity but it will need a crank. Reading, this is likely a...

Do you know what it is yet ? . . . . I can't find part numbers for the upper b-post rubbers, which push into the rear side window seals, and under the chrome trim. Several years ago I did try the local MB main agent, they claimed not to be able to find them on EPC, and couldn't order...

Hi everyone, I'm looking for this door seal indicated by the red circle on the picture below. Does anyone know the part number? Or maybe does anyone have it available for selling? Thanks!

Had car looked over an an injector seal is leaking. Obviously wants doing sooner rather than later but has anyone done one before and what tools would needed? I have a friend whos fairly useful with some things but hes never done an injector seal before. Hoping its not too far gone that head...

Just a heads up for fellow British ABC owners. I sent of for the ABC seal kit #MBZABCSEALK from California and it only took 3 days to get to me here in the UK. $115 all in. The company is called invasion auto products. Outstanding service:thumb: Now you know.

Hi guys Looking to hire or to buy a rear main seal install tool for w208 clk55 engine