selecting

  1. S

    bit of a thump when selecting drive from cold

    I have noticed recently when starting in the morning and selecting D there is a bit of a thump when engaging gear. It does not do this when warm. Not noticed this before. The ATF fluid was changed around 7k ago. Should I be concerned? Thanks
  2. Gledsyc63

    Car lurching stalling when selecting gear

    Just after some advice or help pinpointing a problem. Car c63 2012 V6 tune Full ipe Carbon intake Quaife diff For the last 2 years the car has been slightly jumpy rev needle bouncing very small amounts. I had a full software update done to try rectify the problem. The tranny fluid was...
  3. F

    Stalls when selecting a gear

    My son has a 1995 C200 Elegance (engine 111.941) that has a problem when starting up. The engine starts fine and ticks over correctly, but as soon as you select a gear it stalls. You can get around it by revving the engine before it has chance to stall, but this is far from ideal. No...
  4. jfhuk

    7 speed autobox on E series W212 not selecting D or R when starting occasionally

    Just lately I've been getting the odd occasion that no gear is being selected when I move the selector to D or R after starting the car (plus the D or R light in the speedo doesn't come on) the car just sits in Park (P). If I restart the car and select the gear again then I can select the gear...
  5. dddooommm

    Diesel automatic stalls when selecting gear on cold start w209 w211 270 om612

    Diesel automatic stalls when selecting gear on cold start w209 w211 270 om612 To MBCLUB- Why does my auto Diesel engine stall on cold starts as soon as I change from P PARK to D DRIVE or R Reverse ? More info: -I've turned the AC unit off before starting the car. -Battery &...
  6. C

    W203 coupe c180 auto (non komp) rough idle when selecting D or R

    Hi guys, First time posting here but will share my (little) knowledge where I can for issues people are experiencing. SO...... Initially the code thrown up was reading a fault in the MAF sensor. So 80 odd quid later, new one goes in and doesn't solve the problem. Turned out to be the...
  7. G

    W212 Passenger mirror drop when selecting reverse?

    Hi All, So 2 days into E300 Bluetech Hybrid ownership and I'm really liking the car, which says something when I've just come from a C63. However I cannot work out - and this includes from looking in the manual - whether all E-classes should have auto-dipping passenger mirror when reverse...
  8. maar10

    auto gearbox 124 not selecting

    hi there, i've got some problems with my w124 220 gearbox. got ok to work this morning but when trying to leave i couldn't start the car and it seems like it is stuck in neutral as even in reverse or any gear it just seems to roll. any of you guys got any ideas?. just have had it a few months...
  9. JohnEclass

    Selecting Reverse

    Quick question on gearbox.....My car moves smoothly into gear on the flat, but I have a sloping drive, probably 10 to 15 deg. Every morning I put my foot on brake grit my teeth and move the gear lever into reverse....then 'thump' its in reverse.....is this normal?...is it because I'm parked on...
  10. K

    Please help on selecting options for w212 to use in 3rd world

    I fell in love with w212 (long time MB fan) and intend to order UK spec car to use in Bangkok in the next few month. The road condition here is bad and traffic are even worse. Weather is hot and humid. I'm practically in car around 3 hours everyday (can you believe it, it's only around 40km)...
  11. John_Doe

    W202 auto box not selecting gear

    Oh the joys of owning a w202! Last night I went for a drive for the first time in a little while ad I noticed that the gear changes were really fierce. While it was cold it was really banging in to gear. I ignored and though it just needs a run. I stopped off to get take away and then on the...
  12. login_user

    Car nearly stalls when selecting drive.

    Gents My car clk 270 nearly stalls when selecting drive or reverse,It's worse when cold and has stalled a couple of times. Once driving along it's fine, it's just the initial first selection. Thanks
  13. wobbly

    Direct select, not selecting gears.

    Ive been away for a few weeks, took the car out this morning, and theres a problem selecting gears. I drove a few miles, everything fine, I selected reverse, and reversed into a parking bay, then tried to select drive, but the direct select would not move from reverse. I turned off the...
  14. IMD

    1990 W124 230e annoying vibration when selecting Drive?

    Hi all, Happy New Year to you all. I'm after a little advice. I have a 1990 W124 230e saloon. It's a low compression engine model (spent its first 3 years in Africa) and is generally great condition, well looked after, low mileage etc. But there is a frustrating vibration! In neutral, at...
  15. P

    270 CDi rough idle and surging when selecting D

    Engine very rough at idle and rather than moving slowley when selecting D surges or judders. Fine when revs increased and driving normally. Tries Wynns injector cleaner which did reduce the surginging for about a week - can anyone offer advice ? mileage is 55K Bought this 4 months ago with 39K...
Back
Top Bottom