Has anyone had any issues with arch clearance after fitting H&R springs? I did a bit of research prior to ordering said springs and the general thread seemed the that they provided quite a gentle drop of say 1". So I ordered them along with some after market alloys as my originals had been...
Hi.
Some advice needed please. I've seen the below springs on eBay. Does anyone have any experience with these? Ideally I'd like a 40mm drop but could go to 45mm.
Would 45mm be too low?
Look at this on eBay DIRENZA TUV SUSPENSION LOWERING SPRINGS 45mm MERCEDES E CLASS E350 E280 W211 | eBay...
I've finally purchased some Eibach lowering springs (<40mm) and I'm going to tackle fitting them myself.
It's lower already as I understand the previous keeper changed the shocks and removed the spring pads. I was planning on buying original pads and then installing the springs to hopefully...
Hi all, I have just come across a e320 estate v6 3.2.
Looking in various sites there are many different springs, I gather that they to confirm is the coloured banding.
My question is are there some that would do for more than one model? My car has the auto levelling shocks. Thanks
Gents,
Anyone had the lowering springs on the E-class? If so, what's your verdict etc?
I've seen the Eibach ones which I had on a previous car and I loved them. Car sat nicer on the wheels and handled slightly better IMO.
I'm certainly not after that 'slammed' look people go for, just...
Team:
I will pay the first person who correctly posts the Euro Spec Sport Spring part #s for the R231 (2013+ Sl550/Sl500)... currently there is no one in the states, and I've contacted dozens of people, who knows these part #s -- the front and the rear spring Mercedes part #s.
I'm happy to...
As I am in the process of switching to a different setup, there will shortly be a full set of H&R lowering springs available.
Approximate drop 1.3" front, 1" rear. Usual top H&R quality.
Will be looking for £150 if there are any interested parties, otherwise I'll add them to the parts hoard.
W204 C63 64 Plate - OEM Springs
Only covered 16K before being replaced by H&R springs at MSL.
They have been degreased and cleaned and are in very good condition.
These may fit other models to give an OEM lowering or may be wanted as spares. Please double check compatibility before...
Just replaced both front springs (Sachs)and am now looking at the height of these. When I first fitted them they where 72cm to the top of wheel arch inner, this has dropped to 68 cm. I still seem to have an extreme gap. The car is running on 16 inch wheels, anyone got any idea what the height...
Hi members. I am driving a vito 115 and twice my left rear spring popped out. Using gas shocks and both rubbers at the ends of the spring were installed. What could be the problem?
Got another front spring gone, these Mercedes seem prone. Anyway question is how do I access Mercedes epc, as there are 3 different types listed, or they are marked with paint 3 dots white white blue.the cars an elegance.if anyone has any ideas much appreciated
For sale are my standard shocks and springs, fully working and doesn't come with the top plates.
looking for £100 collected or £120 posted
cheers, jon
07949924080
got a set of lowering springs which were on my 2012 mercedes c-class estate but will also suit any saloon or estate diesel c-class or a larger engine petrol.
bought around christmas and was on my car for 6 months, selling as not needed anymore, very good condition,
looking for £150 posted...
Hi i have 2 Sets of H&R lowering springs
H&R 29265-3 for W211 4matic,not sure if they will fit other models £75
H&R 29076-5 for W204 c class and W218 cls 250 cdi 350 cdi might fir other models but not sure £80
Both sets are brand new
would prefer collection from Birmingham but might...