springs

I have a 1992 w124 300td which has recently had 2 broken springs near side front. The first time the spring remained in position and was found at mot, the second time the broken spring came out altogether when the car was parked. Both springs came from a Mercedes dealer and were professionally...

Sat in a school car park in my 2008 CLS, after doing a couple of hundred miles today and SNAP front offside suspension spring snaps! No warning just BANG. Has this happened to anyone else and is it easy to fix?

I am going to replace the front camber and caster arm bushes and rear springs on my wife's W203 220CDi during the next couple of weeks - weather permitting! My question is, is there a torque setting for the bolts that pass through the bushes, if so, does anyone know what it is? I was going to...

Hello MB folks, My Vito 638 113 campervan seems to be 2cm lower on the nearside than the offside - is it likely to be broken springs, or is there another more obvious reason? It drives fine, with no pull or clunks / bangs from the nearside. Any ideas? Martin

Anyone got any experience of DIY replacement of rear springs on a Vito 638? Cheers! Martin in the flying banana :bannana:

What's the feeling on these in terms of ride, looks, reliability? I can't help but feel that my C63 coupe could perhaps lose a couple of CM in ride height but without going a full shock/spring route, these seem like the only option. I personally find that the car handles very well and...

I fitted H&R springs, think they only do 30mm for the E-Coupe. The car does not seem that low and doesn't seem to have made much difference from original. I have been driving it for about 3-4 weeks now as i was told they may settle more but have seen no change? What do you guys think...

Passengers side needed just to get the car off a ramp

Hi im having a problem were the bonnet on my S500 W140 won't stay up where are the springs and how do I get to them ?

Just an off chance before I go to Mercedes 2005 320cdi avantgarde

sorry wrong thread

It's time to start the upgrade project for my CLS 320 (2006 UK model). My shocks and springs already needed replacement but since i'm gonna lower it i'll need all the info i can get ,to achive the most comfortable riding combination. What lowered springs should i get and what shock absorbers...

On my C63 I think I have a problem with my drivers side rear suspension. When going around left hand corners at reasonable pace it feels like the rear right is 'sinking' although nothing is rubbing onto the tyre etc. Going around right handers everything feels very good and a lot 'firmer' from...

Hi Guys I have just had Eibach Pro springs fitted to my car, They feel great compared to my older sportline springs. I have a question about my ride height, the rear sits slightly higher than the front as you can see in the attachments. I have 1 nib spring pad (8mm) on the front and 2 nib...

Hi Guys I was after a little help in regards to my rear coil springs, car is a 1995 E320 Coupe with sports chassis. I took my car to my local indy and they replaced the rear springs back in September 14 as the originals had snapped at the pig tail. Upon receiving my car back I noticed the...

Hi, would someone know where to get new ones or even proper used?

Hey there, i need the front right spring for a 1988 w124 300 4matic :) i cant find these anywhere so hope someone here can help me

Guys need some help. I managed to find a brand new set of H&R lowering springs 40m drop but been told they were bought for a c209 CLK500 coupe. Iv checked the part number with H&R website and it's the same for both the CLK500 & CLK55 c209coupe. My question is iv spoke to few people and...

Anyone need lowering springs? Ive got some for sale. Brand new. Unfitted. Purchased for my e350 w212 but sold the car before fitting! Cost me 110. Id take 60 posted

Help, Help, Help, Can anyone confirm the correct OE number for the front springs in respect of a 1990 230 Coupe? I have purchased two sets of after-market springs neither of which fit properly. By that I mean the ride height is too high. Any assistance would be greatly appreciated...