tensioner

hi i'm newbie, could do with some advice on this. my 2002 sprinter 208cdi - belt tensioner completely collapsed, belt also broken i think due to being worn through on something. ordered new tensioner and belt from my local motor factors, they take the reg number and supply, all they asked me...

Hi is the aux belt tensioner self adjusting? I have a squeaking when cold from it and after 5 mins of driving is stops. I've put my hand in the tight hole behind the wheel and is seams to feel ok. Could it be the tensioner that needs replacing? Thanks all :dk:

Dear friends, I bought a 57 plate s320 from my company for personal use. It had 128k on the clock when I bought. The engine was replaced with new engine at 107k by mercedes dealer in 27th September 2011. There was some noise coming from engine area in cold start since last month. I...

hi, Does anyone know where the Timing Chain Tensioner is on the OM642 V6 2010 Sprinter Van many thanks Philip

I have had a couple of 380's and always have had the chains riddle and have replace four chains in two car and replaced tensioners at least four times. Is there any way to retro a tensioner with a stronger spring and not have the ridddling when you start up. Or even making a tensioner that is...

Quick question regarding the belt and its tensioner. How many tensioner's do the M104 engines have? I understand that there are three different ones :dk:

Has anyone changed out the supercharger belt tensioner recently that might have the old one lying around? i need the bolt off it as i have sheared the thread off the head on mine. I have a replacement pulley which i want to get on. Pic of sheared bolt head thread thanks in advance

The job for this weekend is to change out that rattling tensioner on the front of the engine . Unfortunately , this is not covered in my W124 Haynes manual . First off , the method of releasing tension from the poly belt is not immediately obvious - am I missing something glaringly obvious ...

Hello to everyone... I joined today to see if anyone out there can help me with a huge headache I am having. MY 02 Voyager 2.4L spun the casing off the idler pulley. Leaving just a ceased bearing on the arm for me to take off. No problems until now. Finding a replacement pulley that will bolt...

This is pretty much the one remaining problem with my 202 and it's a little bit annoying It's had the new style belt tensioner and shock fitted along with a new pulley. However, at idle particularly when the car is placed into Drive or the A/C is turned on, the tensioner will rattle. The Belt...

Made a boo boo on the tensioner last night, Whilst loosening the 19mm bolt to loosen the tensioner I also untightened the tensioner adjusting rod a little too much so the rod is now loose as if its not connected to anything within the tensioner I have searched every post on various forums...

Hello again fellow MB owners. I,m back looking for more help from all you wonderfully knowledgeable people. Thats the niceties outta the way. Heres my problem. Mechanic used to do the work on my car outside of his paid employment (cash in hand as it were). Has now gone out on his own...

Hi all, I have a little rattle in the mornings from my '95 300D and traced it pretty quickly to the top bearing-bush in the shock absorber of the belt tensioner. If you just apply a little pressure to it with a finger, the noise vanishes. It's generally quieter when the engine's warm too...

Hi, Could you tell me who was the OEM for the drive belt tensioner A112 200 0370 and advise whether you can supply a replacement? The part number is taken off the original (seized) item from a 2000 C43. Thanks, Mike

Hi guys 1998 C200 Classic Auto. ‪VIDEO0001.3gp‬‏ - YouTube Check this out for a clearer explaination. Here's the problem I'm having. The Tensioner and pulley have been replaced, the older tensioner replaced with the newer one along with the damper, which isn't usually fitted to the 4...

Hello. Thanks in advance for any help with this problem thats driving me potty. Tried some new parts. Problem persists. On tickover my engine is noisy with a booming rattle. As soon as you bring it above tickover it runs smoothly. On full lock it chirps. Under the bonnet I can see the...

Went to Ian at 124works in Kirkham on wednesday 22/06 as my front breaks were seized and I couldnt get them released, not a problem for chris though and fitted me in presto again.By the time I got there from Wigan parts were waiting to be fitted, front and rear brake pads / front discs ...

I've only had the car awhile, but I've noticed say when parked near a wall, the resonance is very chainy, often squeaky... I've just changed the Oil with 5w-40 Fully Synthetic and the stuff that came out wasn't half bad, so I'd assume it isn't a tappet issue. There is a definately chainy...

Could someone verifiy i have the right tensioner?

Evening All, The Tensioner on my W202 C240 has started to make an annoying rattle when the car is on idle. The noise disappears however when the car is in motion or when the engine is rev'd. I took the car to a local mechanic, who said the car needs a new Tensioner and Belt. He quoted me...