thickness

  1. E

    C63 P31 disk thickness

    Off the top of your head, anyone know minimum disk thickness for PPP front disks?
  2. reflexboy

    Brake disc thickness

    Guys, I think my brake discs are coming to their end of their life and I cannot find the minimum thickness at which they should be replaced. I have wire brushed the hub and cannot find any marking there or on the edge of the discs. Any idea where I can find such info please? If anyone has access...
  3. paul73mt

    Rear Disc Thickness

    Could anybody tell me what's the minimum rear disc thickness for a C350 CDI please as its just had its service and they say the pads are 80% worn (said the same thing last year :) )and discs need replacing also. Thanks Paul
  4. MDC250

    Paint thickness

    Bit of a nerdy question but hoping someone can help... Appreciate every model, down to individual car and even panel can and invariably will have varying depth of paint but...for those that have either got and use a PTG or any pros out there with v expensive PTGs ballpark what kind of thickness...
  5. 5

    Spring pad thickness - ??

    Hi, I have a 230E and I would like to lower it. So, I bought H&R springs (lower by 30mm). I am not sure if I have the Bilstein B4 or the Bilstein HD. I need to buy spring pads but I am not sure what is the correct thickness for my set up. Thanks for helping
  6. T

    blank

    sorry wrong thread
  7. O

    2000 W208 clk430 front brake disc brake discs rotor rotors size diameter thickness

    Hi, so it's time for new front brakes for my CLK430 and I'm looking through what eurocarparts.com has to offer. Problem is (the same problem I had with my last CLK430, but I can't remember what I found out back then), they offer 2 different sizes. I'm pretty sure I either found, or made a thread...
  8. A

    W168 clutch plate thickness

    Hello all! I'm just wondering if anyone knows the thickness of a new clutch plate for the W168.. (1.4 litre). .:dk: And what's the minimum thickness? Best regards, Geir O. / Norway
  9. T

    Paint thickness

    Hi All Anyone know what the paint thickness is expected to be an a 62plate eclass coupe? Ive used my paint gauge, and it seems thinner than my S2000, which is odd as I expected MB paint to be of a better quality
  10. jambo6859

    Brake Disc Minimum Thickness C220 SPORT

    Just got my brakes checked at Kwik Fit in Erith, Kent. They said must pads are fine but my discs all round are 1 mm under the legal requirement...?? They quoted me a ridiculous £620 to replace all pads and discs. Do I really need to change the discs right now should there still be some life...
  11. 24 VRT

    Advice on coating (paint) thickness gauge

    I'm about to start what will probably be a long and difficult attempt to buy a classic car and I need to find a reasonably priced PTG so I can check for accident repairs that are not obvious to the eye. I don't want to spend loads of dosh, but conversely I'm not going to need something that's...
  12. v8sam

    Brake pad thickness

    Can anyone tell me what the thickness should be for a brand new front and rear OE brake pads for a 2009 C63 amg estate so I can compare it to the ones on the amg. Thanks Rickey:)
  13. dokalj

    Detail, Bonnet paint thickness

    Hi all, I hope everyone is well. I am currently detailing the A-class and noticed MB didn't spray the bonnet properly inside. Now they said bring it down so we can measure the paint thickness. If I reduce the paint thickness a little, will I still have a claim or should I not bother...
  14. W

    Brake pad performance & wear vs. thickness

    As per the title, does anyone know how the brake pad performance & wear changes vs. the thickness? Thanks.
  15. P

    Front Disc minimum thickness

    Can anyone tell me the minimum thickness for the front discs on a 54 reg E270 CDI Estate? They are smooth but with a lip around the outside. I have measured them at 0.951" (24.1mm). I would like to hold off for a few months but have an MOT in a couple of weeks and would not want it to fail...
  16. greggster

    ML paint thickness!

    Hi all, My Ml164 has a paint code preceeded with the letter C - i have been told that this means it has an extra thick protective clear coat? Is this the case? If this is the case does this affect the thickness of the paint? What is the normal thickness, is 110 about right (110 on that...
  17. japimport

    thickness gauge

    i bought a thickness gauge today to set my spark plugs along with a haynes manual it sats to set the gap at 1.0mm how do i set it on the feeler gauge it doesnt have 1.0mm on it :doh:
  18. proser

    Spring Shim Thickness - how to identify

    Can soneone help me in identify where the 'burls' are on the shims, just so I can work out what ones I have currently
  19. S

    Body panel thickness

    Has any one out there researched the comparative thickness of body panels across different manufacturers? or of comparative paint thickness. I would be reassuring to know that if you paid more for a vehicle you actually got more vehicle. For example are the body panels the same thickness on a...
  20. Spinal

    Wanted: Clutch Thickness Tester Tool

    As the title suggests, I'm after one of the "clutch slim-jims"; the little flat metal U's that can be used to check the thickness of a clutch without taking it apart. If I can't find it, I guess I'll need to make it, but if you forgot to sell it with your W202, I'de be more than happy to buy...
Back
Top Bottom