tie

Hi guys does anyone know which company supplied the O.E spec track rod ends on these vehicles?

Local MB dealer just did a value service on my S124 and it needs a NS outer tie rod end. I intend to buy one myself and get it fitted at a local garage. What's a good make to get? I was thinking Lemforder. Also, is it a good idea to just replace the one or am I better assuming the OS...

Need one of these, options are MB Online £60ish del ECP - TRW (Lucas) £30 Ebay - Original MB part for £42 or this FAI to clear for £7.82! TO CLEAR - NEW FAI FRONT RIGHT TIE ROD END / TRACK ROD END SS1147 | eBay I have bought from this seller before and not had an issue, I only learned...

Genuine MB parts with receipt. 2 inner tie roads, 2 track rod ends Never got round to fitted them. After £150. All in retail is well over £300. Call 0750 602 8070.

Good day to you all, A few weeks ago I had to have my C280 (w202) brought home on a recovery truck after the immobiliser decided to freeze...there are no visible towing hooks/eyes on my car as it has the body kit fitted..it was fitted when I bought it 7yrs ago and never noticed the towing hooks...

Hi,as per title can anyone tell me if the smaller suspension parts like the ball joints,tie rods,wishbones are the same for a c43 amg as say other w202,s like a c220 c280 etc. Thanks in advance for any replies.

i have an e350 cdi and the inner tie rods have some play in them and need replacing i went to euro car parts and was going to get lemforder but they don't seem to stock them atm so all they have are these Ocap Axial Rod / Tie Rod are they OK to use thanks

I'm about to change all of the steering joints (Tie rods, drag link, idler bush and damper) on my w124, and prefer to use Lemforder. Looking at the ZF webcat, and a few online shops it seems Lemforder only make the left hand Tie rod. Is there any reason the same part couldnt be used on both...

I've had the tie rod s and track rods changed on my 203 ML today and the garage called me to say they didn't come with the locking nuts just normal ones. All of the different types I've seen online are supplied with normal nuts - are the locking nuts required and if so what are the ones supplied...

I'm getting both front inner and outer tie/track rods fitted at the weekend and a full geometry set up done front and back because the existing ones are seized solid and the alignment needs doing. I'm supplying the parts and the same place who are doing the geometry set up are doing the rest of...

Hello all, I read somewhere that if one replaces the tie rods (left and right) and the drag link (parts A1243300803, A1243300903 and A1244601205 on my old 300CE-24 Sportline), it is possible to avoid re-aligning the car afterwards. This is done by setting the length of the new parts to...

Rear Anti Roll Bar Drop Links Snapped Was Having my wheels balanced today to eradicate the last bit of wobble from wheels and when he was doing the rears i just had a nosey under the arch and noticed the tie rods on both sides of the anti roll bar were snapped. I cannot believe that they are...

Hi all, I will be doing my rear tie rods in the morning and just wanted some info on how to really. I have never had to do these before but I'm fairly confident that it's not that hard. Any info would be greatly appreciated The car is a 2005 c220 cdi w203 sport edition

Over the last couple months, I've put in new shocks, new lower ball joints, steering shock, new LCA bushings as part of a suspension overhaul and it has been good so far. The car has been much more stable on smooth roads, but there was still some very prominent shaking in the steering wheel...

I need one W210 track rod gaiter./ rubber boot. Its for a E300TD. Cheers. Olivier

Hello, I need to change a tie rod on the E300TD, what is the spanner size needed for the end that goes into the steering rack? Or is there some other tools instead of a spanner that I can use to un-screw it? Cheers. Olivier

If anyone was in Leicester on Saturday... apologies about the noise as my brother ferried the newly weds around. Sorry about crap phone pic. The 500SL was also used on the day..

The title says it all. While fettling my front brakes on the E300TD, I've noticed what appears to be excessive play in the inboard tie rod ball joint on the driver's side. Is this a common problem ? So far, I have not removed the boot. Is there lube in there ? Is this adjustable ? Do they...

Needs replacing on my C180k (W203). Want to find it cheep. PMs welcomed.

I know a split steering gaiter is but what about the tie rod end rubber boot on the ball joint ? Can't find it mentioned in the regulations... http://www.motuk.co.uk/manual/contents.htm adam