• The Forums are now open to new registrations, adverts are also being de-tuned.

torque

  1. MeanRedSpider

    Wheel bearing nut torque

    There was a little play in both the front wheels of my W210 so I've taken up the slack in the nut literally with my fingers (I don't want to overload the bearing) and the wheels feel much better but still rotating freely and with no tight spots. What's the correct procedure for these...
  2. ringway

    Torque Wrench 20-200nm. Any Ideas Please?

    I'm after a new torque wrench 20-200nm. A digital one would be nice but is not absolutely essential. I wouldn't use it that often, just to make sure I don't over-tighten things such as oil filter covers, wheel bolts etc. Anyone use/know of a decent tool at a reasonable cost? TIA. Paul.
  3. S

    Torque converter woes

    Hi all Recently had my gbox oil and torque converter fluid changed. The car before this had an occassional judder when cold. I was advised best course of action was to wait and see if the change cured this as the judder is indicative of a torque converter on the way out.... It only judders...
  4. A

    ML 270 CDI Cylinder Head Bolts Torque specifications

    1.) Hi, I need to know what the torque specifications are on a 2000 model ML 270 CDI. 2.) Do I need to torque them only once, or again after +/- 1000Km driving as is the case with certain other vehicles? 3.) Can I use the same head bolts or should they be replaced with new head bolts?
  5. mustang

    exhaust manifold torque settings ml 270 cdi???

    hi all. i am changing me exhaust manifold gasket and "now" also my turbo to exhaust gasket. i put a post in a few months ago asking why it was whistling ? got so fed up with trying all sorts of things i got the ump and stripped it down. anyway it was blowing on the front one and also turbo...
  6. ceticcross

    Steering wheel not central following torque strut bushes change

    Hi, is this liable to be related? Just had the front torque strut bushes replaced and when driving today I felt that the steering wheel was sightly off centre to the left. Car not pulling left I just felt that the steering wheel was off centre to drive in a straight line. Does this sound...
  7. ceticcross

    Torque struts

    Hi All again, just got my two rear spring coils replaced by a main dealer (2003 e320 cdi saloon) and they now tell me that both front Torque Thrust arms and both lower ball joints need replacing. asap. They have quoted just over £700. Does that seem a resonable price? Can anyone advise me...
  8. proser

    URGENT HELP NEEDED!!! Injector bolt torque

    does anybody know the torque setting for the injector clamp bolt on a 320CDi straight 6 engine. seal blew on one injector as we were leaving for holiday with the caravan, so need to get it sort ASAP.
  9. proser

    torque curve for 320cdi (early)

    does anybody know when the torque kicks in, rpm wise ??
  10. proser

    W210 Facelift Torque Convertor Drain Plug

    Does anybody know if they actually have one ?? Doing a gearbox refill and can't find the plug to drain it and I have turned it about 3 times :mad: If it hasn't got one, then what's the best way of getting all the old oil out ?
  11. A

    W210 E270CDI engine torque/speed limitation

    Hi all, I'm becoming quite desperate in this one... (have a '00 E270CDI) Since some time, now and then, my engine becomes limited in torque (and thus speed). When this issue occurs, WOT shift points are at 1800rpm and I can keep accelerating in 5th gear very slowly untill some 2600rpm...
  12. andy_cyp

    Fighting Torque 2009

    Sunday 16th saw my second year at this event held at woodbridge airfield. The aim was simply putting your car through its pace on a 1 mile piece of asphalt with your 1/4 mile , 1 mile runs being timed plus your speed at the end of the mile. 50 cars were invited to this event but only 40 made...
  13. A

    torque convertor s class 320 cdi

    Does any member know of a garage that will repair/replace torque convertor on my s 320 on a 53 plate at reasonable cost but do the work to MB standard.My local MB garage has said it needs replaced after checking the car over.Some garage near Edinburgh would be good.Also what does one have to do...
  14. camerafodder

    Torque capability of 7 g-tronic box on s211

    I'm considering having an ecu remap but I'm concerned about the effects on the transmission of my '55 plate E320cdi S211. Can anybody point me in the right direction with regard to the torque capability of this gearbox? Thanks
  15. M

    Max Torque rating of C220 W203 Autobox

    This was apparantly listed on the other forum but I can't find and info. Interested to see what the figures are with all the talk of ECU mapping and the Brabus chip being pulled a while ago. The 5 speed on mine comes up as 722.699 Cheers Adam
  16. Bobby Dazzler

    Possible to change torque converter lock-up point?

    Lots of - no all - owners of C32 AMG complain of the noticeable and sometimes harsh lock-up of the torque converter. It comes as standard with every C32 AMG!! :D Anyone know if it's possible to change the point at which lock-up occurs, either with STAR or something else?
  17. S

    Torque covertors,an issue or not??

    I've been looking at getting a c class, some peeps on here have mentioned the E class as a option (which i like) any how i've seen a ad on egay http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=120373260199 The guy mentions automatics seem to suffer problems with the...
  18. compress ignite

    Torque Specification (???)

    For the attaching bolts (With disc type washers) of the Mechanical Vacuum Pump of the 602.962 engine??? 601.XXX and 603.XXX engines also use this Vacuum Pump. Yes,I have searched here and in the U.S. site ,BUT No Joy...Yet. part number 000 230 31 65 Thanks!
  19. M

    Torque Converter - New or Reconditioned

    Hi there all. After alot of tests, the problem has been narrowed down to the torque converter. Now should i fork out £1000 roughly for MB one or £250 for a reconditioned one? If reconditioned one, then where do i get one? a good reliable supplier? I live in Edinburgh and there is...
  20. gIzzE

    Horsepower or Torque???

    Really interesting thread on one of the BMW forums, it is an American based forum and some are getting excited about the arrival of a proper diesel at last, they are getting the 335d. Just wondering what people know about hp and torque?? The question is what is more important??
Back
Top Bottom