Hi,
Ive been having nightmare with my Sprinter van over the last six months.
Excessive billows of white smoke (especially at idle and on acceleration) and fumes in cab.
Problem comes and goes as it pleases
All injectors replaced at the Mercedes garage - problem persisted
DPF removed and...
I've been trying to resolve high fuel consumption on my 300CE-24 and after many dead ends have discovered that the cold start valve is powered all the time (12-14V between terminals). There doesn't seem to be a thermo time switch on my model and I've monitored the CSV as the car warms up from...
I have a C180 W202 with 722.602 gearbox. I enjoy a harsh 3>2 downshift cluck, when coasting to a stop sign. To solve this I have already exchanged oil, conductor plate and plug of the valve body/speed sensors and Sonnax spring 68942-01 but zero result.
Yesterday I bought a used gearbox 722.614...
I have removed and cleaned the manifold on my w210 e220 . And I tried sucking on the valve to check if it moved and it didn't .I thought perhaps my sucking was not strong enough but when I tried the suction on the pipe It felt very weak. Any ideas:crazy:
I'm doing some research on ABC valve blocks and need an old one (Pre 2006) to rip apart.
If you are replacing your valve block I'd be interested in obtaining your old non functioning one.
Just pm me the details.
Thanks in advance.
:thumb:
Hi
I am looking for the part number or even better the actual part.
Part in question is the evaporative purge valve which has started ticking very loudly and I want it replaced.
Car is 2005 facelift W209 CLK500
Any help appreciated
Thanks
The EGR valve in my S-Class is firmly stuck in place -- barely moves a mm with all sorts of belting and hammering, and apart from the two screw holes there is not much to get a hold of. Is this normal?
Does the fact that it is so stuck in place indicate that it is clogged up with carbon?
Hi guys I need help on my c180 w202 1997. the main heating supply valve that is under the air box has two wires to it can you tell me what colour wires go from as you look from the front of the car towards the fuse box as they are not not attached to the valve and I don't seem to be able to find...
Can any of the Indy's give me a rough estimate to replace a heating duo valve on a 2004 E55K please? Or of course anyone who has recently had this work done.
Took my sister and Dad out for a run this afternoon and there were complaints from the back that there was hot air blowing at the rear...
Hi my sages,
I am wondering whether the black pancake looking component situated 6 inches forward of the oil cap on my e320 cdi w210 is the crankcase breather valve , filter?
it has a rubber pipe exiting it and joining onto a large tube that enters the turbo ,the pipes are oily where they join...
Changed fuel pump started up and ran fine noticed a small petrol leak so tightened up pump & spanner touched 2 terminals and arked now car won't start !!!! Is there fuses in the boot if so does anybody know where they are or could it be a relay ??? Any help appreciated. Thanks sorry it's a 24...
As per title, and some of my old thread here where our GL got stuck in gear about a month ago, yesterday threw a towel and did not shift up from 1st.
Anyways, to cut story short, called Mobilo and they took me to dealers and it is going to cost in a range of 2500 Swiss franks.
After a brief...
Does anyone have any idea how much it would cost to have the valve cover gasket replaced on a Mercedes ML270 CDI year model 2004
Also cost of replacing the poly v belt on same car.
Mercedes independent garage or Mercedes Dealer cost or both.
Gary
Hi folks,
After looking up what I can find on heating issues (centre console too hot to touch and nothing but hot air in the rear of the car), I figure the heater control valve has gone.
I've got a new one, stripped out the necessary to see the thing including all the wiper drive, but it looks...
Hi
Guys
I am just gathering some interest if anyone would like to TCU remapping on the 7 Speed AMGs, both Converter and MCT based Transmissions are supported.Increased Line Pressure, Faster Shifting, More Precise Shifting.
Your valve body, it is modified using our proprietary techniques to...