welder

Is anyone looking to part company with their MIG welder? I need a 'new to me welder', err... just see what cars I own...:doh: Nowt gas-less...or 3-phase. Prompt collection from Swansea to London, but other areas considered. Cheers :thumb:

Hi All, I'm in need of some serious welding/reconstruction on a 190 Cosworth. Has anyone enjoyed a good job in my region - Manchester/Lancashire. Many thanks in advance. Cheers, Paul

Hi guys, The rear exhaust bracket on my CLK (W209) has corroded and so needs to be welded. Does anyone know of a place they have taken their Merc to in/around London (preferably East London) for the same sort of problem? Thanks

Hi all, Not a Mercedes needing welding..but my trusty Lada Niva! Yes..it's my off road workhorse that I use for work at one location (don't laugh..it will go places my other cars dont dare!) I need some welding done....2 new wings fitted, some new metal put in the inner sills. The car is...

The time has come to buy a new MIG welder. After discovering that the progressively worsening knocking coming from the rear of my 300 td was not just a worn subframe bush but in actual fact the rear section that the bush is bolted to has come adrift! After much head scratching I decided that...

LIDL - welder LIDL - electrodes For welding both steel and sheet steel Adjustable welding current range (A): 40 - 80 Idling voltage (V): 48 Electrode holder cable, length (m): 2 Earth clamp cable, length (m): 2 Electrode size range Ø (mm): 1.6 - 2.5 Welding material thickness (mm): 1.5...

Hi i'm after a credit-crunch busting mig welder if anyone has one for sale :D PM me if you do - happy to consider something incomplete (ie no mask or whatever) aslong as i can buy the bits elsewhere... also not worried about age/condition obviously aslong as its safe and working...

Guys, or maybe ladies, Does anybody have a welder, stick (arc) prefered in the Farnham, Surrey area that I can borrow to finish a small job? Mark,

I'm sorry to be starting this thread in the wrong place (i actually couldn't think of where else to put it :P) but i have some welding that i need doing, and i dont want to try doing it myself as its proven to be alot harder than i originally thought. So as the title states... could anyone...

As it says a 210 amp single phase mig welder. Has a pretty full reel of 0.8 wire I think, may be 1.0mm. Takes a full size bottle and comes with some new tips etc. Very little use so in VGC and it's in my way now. I bought it a couple of years ago to sort out the chassis on a friend's american...

Got a tricky bit of work needing doing on my 107. The channel that holds in place a seal that runs around the edge of the soft top compartment has corroded in two small 2 inch sections, meaning i cant replace the perished seal as there is no retaining wall to support the seal along these...

nearly threw my sealy 180 in the bin today - I'm sick of it - never never got a decent weld from it.. So - gonna buy mesen' a nice shiny new 'un... Looking at cebora, murex etc - professional quality stuff. 160 Amp is about all i really need. Budget of say 500 quid? Single phase, Dont need...