Hi
I have just purchased an illuminated Start for my C204 (62 plate) and need some help with the wiring if possible.
The Ebay advert shows how to fit the start but only says attached wire to front parking light. There are only 2 wires with this item and it says Tap the wires to parking lights...
Hi
I have just purchased an illuminated Start for my C204 (62 plate) and need some help with the wiring if possible.
The Ebay advert shows how to fit the start but only says attached wire to front parking light. There are only 2 wires with this item and it says Tap the wires to parking lights...
Hi
I have just picked up a 638 that needs some work. At some point it has had a replacement tailgate and a lot of the wires have been cut.
There is a problem with locking the tailgate which I am working on but I require a diagram of the wiring for the tailgate to troubleshoot.
Any help...
I'm working on my CL203
I 'm about to fit an after market set of front parking sensors & the wiring instructions state, 1 ign fed live feed,1 earth & 1 via a brake light feed. When the brake lights come on the front parking sensors are live for 30 secs, it's easy to fed a cable from the brake...
I'm just about to take a look at a friend's 06 SLK which is having a few intermittent boot lid problems such as the electric lock release not working or getting error messages for number plate light or third brake light being duff.
It strikes me that it's some sort of wiring problem and I'm...
Hi guys.
Just brought an 08 plate clk W209. In the glove box are a pair of cable connectors which I have no idea of their purpose. One has 2 orange cables leading to it and the other a brown, blue and red.
Any comments or ideas as to what these could be used for?
Steve
This is a repeat of the same post in the Electronics section, but I think will get more exposure here.
My '94 R129 SL500 needs a new engine wiring loom (no surprise...). The VIN is WDB1290672F103359. I planned to get it refurbished by Si-Leck in New Romney (half the price of MB for a new one)...
My '94 R129 SL500 needs a new engine wiring loom (no surprise...). The VIN is WDB1290672F103359. I planned to get it refurbished by Si-Leck in New Romney (half the price of MB for a new one). It's a (very) long story, but I'm beginning to suspect that the (poor condition) engine wiring loom off...
So I'm finally going to bite the bullet and fit a dual front/rear dash cam to my facelift W212 E Class Estate.
The fuse box is on the right hand side of the boot compartment. I'll probably also locate the recorder there as well, so just need to get the camera cables to their final location...
Hello to all
I own a E320 cdi elegance full option except power sunshade and have acquired every thing OEM is needed to add this option by my problem is that here in Albania my local dealers don't have any ideas to retrofit it so I did everything but the plugin isn't there
It's been one week...
I have recently restored a 94 e320 and have fitted a new compressor and dryer.. The old dryer had 4 tails and the new one 2,
There are 3 wires coming down from the relays one black, yellow and blue and the black one is powered when the dash switch is on.
the remaining 2 wires are from the fan...
2005 R230 - Wiring Diagram or Wiring Code for BOSE Amplifier Replacement
Hi,
I am starting a project on my 2005 SL350 (R230) to replace the BOSE Amplifier plus Head Unit where I would like to receive advice from other members (who may have done such a job in the past) concerning wiring...
Hi all.
My son has recently bought me new KENWOOD DAB radio for my car, which is a 2001, CLK 320 (W208)
The car has had what looks like the original basic Mercedes Stereo 10 head in it, though the volume control on the steering wheel as never worked.
Before i wire in my new stereo...
I had to replace the core plugs on the inlet manifold side of the engine block on my C220 1995, i knew before hand that the wiring in the engine bay is cracked and the insulation is hard so i took care to bend the wiring as little as possible but one has to bend it to get the inlet manifold off...
Wanted for a W124 Coupe:a good condition rubber tube, 000 546 0285, as in attached picture, that carries the number plate wiring. It attaches between the boot lid and the hinge.
Thanks,
Andy
Good evening all.
I wonder if any of you can help. (I am new, be gentle). I've had an ML for 4 years and loved every minute of owning one. Had a fairly basic 280 Sport W164.
Anyhow's cutting a long story short, some fool on the motorway a few weeks ago decided to fall asleep and hit...
I have not bought a camera just yet, but wondered if the power socket inside the boot space works via the ignition switch, as I don't want to use the front one which requires leaving the cover open, plus no where to hide the wire. The other possible option is the usb inside the arm rest as the...
I'm hoping somone can help with the wires for the stereo.
Bought a new DAB to replace current stereo, removed the old unit to find the loom has been butchered.
Can anyone tell me what colours the earth, perm live and switch live should be please. It's a mine field at the moment ...