190E ariel swop problem

ianturner

New Member
Joined
Oct 21, 2003
Messages
16
Hi I need to replace the ariel on my 190E which is mounted on the rear wing with access through the boot on the left hand side.

The problem is, inside of the boot (on the left hand side) there is a great big piece of plastic trim in the way and I am not sure how to remove it, to get to the ariel to replace it (without causing damage)

Any ideas welcome please
 

bazza

Active Member
Joined
Jan 16, 2003
Messages
162
Location
Central Scotland
Car
S211 280CDi
From memory you need to unclip the carpet in front of the petrol tank then pull the plastic down from under the rear wing. It will bend OK then just remove it.
The first time I removed it I thought it would break or something else was holding it but it comes out easily

Hope that helps

Bazza
 
OP
OP
I

ianturner

New Member
Joined
Oct 21, 2003
Messages
16
Hi Bazza thanks for that tip

Thanks Bazza

I will carefully! give that a try

many thanks for your help
 

Users who are viewing this thread

Top Bottom