1985 SL500 Crank Pulley

[b11ocx]

The Crank Pulley on my SL500 seems to be a bit bent and knocked about. This is evident when the engine is running and the belts are noticeably wobbling. I suspect that the people who replaced the water pump have given it a hard time !

The water pump has already been replaced and the engine runs very sweetly so I doubt it is any more than a replacement pulley required.

Trouble is that these are listed as NLA according to the garage which is fixing it, so any thoughts would be appreciated.....

Thanks in advance

 

[jaymanek]

I have a 380 and a 560 engine in bits, if either of these have the same crank pulley, i may be able to supply.

 

[b11ocx]

I am trying to confirm if they are the same, but struggling to get the part code.

The one in the 500 seems to be A 116 032 22 04

 

[jaymanek]

Looks like the 380 is one is the same not the 560 from my quick research on the parts catalogue... give me a call/email if you need it...

 

[b11ocx]

Thanks Jay, dropped you and email.