Whilst restoring the roof cloth I partially opened the roof and closed it a few times. All seemed well. Normally the roof works perfectly. Until now!! It has just stopped moving altogether. Here is what is happening.
* Open roof handle - all windows open, consul roof switch turns red
* Pull up consul roof switch - switch flashes but NOTHING else happens
* everything else seems to work fine incl. boot lock, rear safety head rests, windows, central locking .....
So far all I have done is
* Checked all fuses in boot fuse box. All intact
* Run an OBD2 fault code check - no faults shown
* Checked that boot pull out cover was correctly extended and triggering trip switch
* Turned on and off just about every switch to confirm that everything is working
So now the roof looks fantastic by way of the work done on the canvas but it doesn’t open!! Not great situation.
Are there any kind People out there that could give me any advice? It would be much appreciated.
* Open roof handle - all windows open, consul roof switch turns red
* Pull up consul roof switch - switch flashes but NOTHING else happens
* everything else seems to work fine incl. boot lock, rear safety head rests, windows, central locking .....
So far all I have done is
* Checked all fuses in boot fuse box. All intact
* Run an OBD2 fault code check - no faults shown
* Checked that boot pull out cover was correctly extended and triggering trip switch
* Turned on and off just about every switch to confirm that everything is working
So now the roof looks fantastic by way of the work done on the canvas but it doesn’t open!! Not great situation.
Are there any kind People out there that could give me any advice? It would be much appreciated.