202 exterior door trim removal

Page may contain affiliate links. Please see terms for details.

stevesey

MB Enthusiast
Joined
Sep 3, 2007
Messages
2,969
Location
Bristol
Car
Alfa 156 1.8TS
Just washed the car and noticed a rust bubble emerging from underneath the top of the rubbing strip, looks like I need to remove the strip to sort out what's going on behind. Rust is within the recess for the strip so I should be able to sort quite easily.

Before I start any tip on removing the strip, there's a screw at the B pillar end - after that what's next - slide it backwards/forwards? Or are there any nasty clips I have to risk breaking?
 
Last edited:
you just take the screw out,then slide it towards the rear of the car, i know coz i changed my door last weekend i had to strip it,
 
Plastic trim removal

I need to repair a bit of rust on my car too (same model) behind the same trim but the piece that fits on the wheel arch. I can't feel any screws behind it, can anyone tell me if it is held on with clips or suchlike.
Many thanks
 
Trim removal

Fantastic. Many thanks.
 

Users who are viewing this thread

Back
Top Bottom