20mm Wheel Spacers

Page may contain affiliate links. Please see terms for details.

V8CXG

New Member
Joined
Dec 22, 2020
Messages
7
Location
UNITED KINGDOM
Car
C63S W205
Hi all,

Sorry if there already is a post about this but im new here and not 100% sure if there was one already.

Ive just fitted some 20" after market alloys to my c63s. The back sits flush with the arch but the front sits quite a bit inside the arch and I was thinking of fitting some 20mm spacers to widen the fronts a bit.

Would that affect my wheel alignment at all?? Also, would it cause any long term damage to bearings etc.

I have attached a photo of the wheels

Thanks in advance..
 

Attachments

  • Screenshot_20210309-103350_Gallery.jpg
    Screenshot_20210309-103350_Gallery.jpg
    1.5 MB · Views: 22
Wow ! I am no expert on this , but the front look too tucked in and the rear looks too far out . Are the offset dimensions correct for this wheel/car combination 🤷‍♂️
 
Wow ! I am no expert on this , but the front look too tucked in and the rear looks too far out . Are the offset dimensions correct for this wheel/car combination 🤷‍♂️
The backs actually look further out than what they are, theyre actually flush with the top of the arch which I am happy with. Only trouble is the front which I am hoping to get somw information on.

Is 20mm too much for spacers and what kind of damage could it possibly cause..
 
I have 10mm on front, 20mm on rear. 20mm is fine.
 

Users who are viewing this thread

Back
Top Bottom