300CE Stalling

Page may contain affiliate links. Please see terms for details.

Bill_33

Active Member
Joined
Aug 29, 2008
Messages
249
Location
Hampshire
Car
A160,(W169) previously 300TE - 300CE, E280TE
Not used my 1993 300CE for a few weeks

It has now started to stall now and again when coming to a stop, (at a road junction or roundabout) - only does it when hot

Feels electrical - as though it is not firing on one cylinder - clears itself when I restart and rev the engine - but it can take a few "goes" and I feel that "it is still there"

Any ideas?

Where should I start looking - petrol OK and it had new plugs a few months ago, (when it had a mild service).

Cheers
 
10 years ago I had a Ford Mondeo, which had the same symptom.
The the fault was with the idle speed control valve.

HTH
 
Hi there...Was this problem fixed?

My mate has the same symptoms on his 300ce, not sure where to start looking!

Can anyone help?
 
check for condensation in distbutor cap first located at front of engine held on by 3 5mm allen key bolts
 
Thanks will check that first
 
had similar issues in my old volvo at one stage. condensation at the end of the HT leads was the problem.
 

Users who are viewing this thread

Back
Top Bottom