slippy
Active Member
- Joined
- Dec 28, 2007
- Messages
- 119
- Location
- Mexborough, South Yorkshire.
- Car
- Jaguar X type 2.2SE / SLK 230k
Having searched the net for a suitable wind deflector for my newly aquired SLK I discovered that they were either very expensive or not to a design that I liked so I decided to get one made how I wanted.
Im considering getting a batch of 10 made if there is any interest. If I order 10 the cost comes down & I could do them for approx £50 each inc P&P
They are secured by removing the two little hooks, placing the screen in position, marking then drilling two small holes & use the screws from the hooks to secure it in place. The carbon wrap is just a sticker & not included.
This is the first one I had made, the 2nd design is slightly longer at the bottom & the sides angle out slightly. Still made of very sturdy 10mm thick clear acrylic though.
This first one is for sale on ebay at the moment, only used for a couple of days till the second design arrived. It dose have very light marks from handling & manufacture as like I said, this was a test piece before I altered the design very slightly.
Stu
Im considering getting a batch of 10 made if there is any interest. If I order 10 the cost comes down & I could do them for approx £50 each inc P&P
They are secured by removing the two little hooks, placing the screen in position, marking then drilling two small holes & use the screws from the hooks to secure it in place. The carbon wrap is just a sticker & not included.
This is the first one I had made, the 2nd design is slightly longer at the bottom & the sides angle out slightly. Still made of very sturdy 10mm thick clear acrylic though.
This first one is for sale on ebay at the moment, only used for a couple of days till the second design arrived. It dose have very light marks from handling & manufacture as like I said, this was a test piece before I altered the design very slightly.
Stu
