ABS ECU Wiring rear left

[Sussex_Chris]

Hi, Would anybody on here be able to assist me in finding out the wires that go from the Rear Left Hand Wheel Sensor to the ABS ECU? I have done a test and its showing as open circuit so I would like to run in new wire’s to eliminate the problem. I have tried to clean and re seat the connecters where I can, but cannot trace a break ;;;. If anybody had an ABS wring diagram for a 2002 270ML it really would be appreciated.
Really need to know where the 2 wires connect to the connector block in front of the ABS ECU
Thanks

 

[Sussex_Chris]

Can anybody help on this? I would really appreciate it if somebody could assist on what wire on the ABS ECU block runs to where? I know the lower 2 are the + and - and am getting voltage, as said previously, just an indication on which wires to bridge between the rear wheel speed sensor and the ABS Unit connector plug as I should then be able to work my way along the visible (and accessible wires) to find and repair the break(s).
Any help would be appreciated.

 

[BlackC55]

Www.serviceandparts.net

Subscribe to WIS and you will find a diagram there.

On your car they suffer from the loom rubbing on the chassis rail at the back for the wheel speed sensors.