I successfully fitted a set of rear after market sensors to the CL203 & they've worked well; so I decided to fit a set of front sensors.
These are of 'Cisco' brand & purchased from a seller on e bay.
When fitting I used photographs from sales cars to identify the correct positions in the front bumper for the sensors and found the actual fitting to be straight forward.
The set up is, 1 ign fed live feed & 1 via the brake lights which allows the control box to be live for 30 secs after pressing the brake pedal. The problem is these seem to be so sensitive and after braking they seem to be picking up the road & the sounder keeps chirping away. Does anyone know of a way to make them less sensitive. I've contacted the seller who hasn't really been of much assistance.
If I can't solve this problem it looks as If I'll just give up & disconnect the sensor control box & leave the sensors in the front bumper.
Help or suggestions anyone ?
These are of 'Cisco' brand & purchased from a seller on e bay.
When fitting I used photographs from sales cars to identify the correct positions in the front bumper for the sensors and found the actual fitting to be straight forward.
The set up is, 1 ign fed live feed & 1 via the brake lights which allows the control box to be live for 30 secs after pressing the brake pedal. The problem is these seem to be so sensitive and after braking they seem to be picking up the road & the sounder keeps chirping away. Does anyone know of a way to make them less sensitive. I've contacted the seller who hasn't really been of much assistance.
If I can't solve this problem it looks as If I'll just give up & disconnect the sensor control box & leave the sensors in the front bumper.
Help or suggestions anyone ?
