Air mass flow sensor

Page may contain affiliate links. Please see terms for details.

steveyboy

Active Member
Joined
Dec 11, 2019
Messages
98
Location
manchester
Car
e220cdi 2009
Anyone tell me where air flow sensor is on a 2009 e220cdi and any other sensors for dpf problems,and is it doable for a diy.
 
If you have a 651 engine: item 60

B52135000039.130827.png
 
Last edited:
No idea but thanks for diagram,dpfs are a problem second time I’ve had a problem 1st time garage cost a bomb,so thought I’d fit new sensor myself,is there any other sensors that are for the dpf.and why didn’t Mercedes fit a signal that pdf was working or not.🤬
 
Any problem in boost line balance (inc. EGR) can trigger MAF fault, thats why it should be investigated by experienced garage... how you think MAF is culprit now? What symptoms/fault codes you have?
 
Any problem in boost line balance (inc. EGR) can trigger MAF fault, thats why it should be investigated by experienced garage... how you think MAF is culprit now? What symptoms/fault codes you have?
last time i had it done at garage came up with dpf kaput had it done then a few days later engine light came on again,back to garage another £65+vat for diagnostic came up with mass air flow another bill.so that is why i no longer wish to go down garage route again i had my local indie do a forced regen and engine light came on again,so thats why i am asking for any answers to mass flow and any other sensors plus where situated and will replace one by one myself.
 

Users who are viewing this thread

Back
Top Bottom